Abstract:In the past, Mg-Zn alloys prepared by a two-step manufacturing process of casting plus extrusion have been demonstrated to be a good candidate for biodegradable applications. But, studies on fabricating of Mg-Zn alloys with a single step process of squeeze casting capable of producing porosity-free Mg alloys, which can reduce the cost, are limited. In the present work, Zinc (Zn) addition varying from 1.0 up to 10.0 wt. % was introduced into liquid magnesium. The alloyed liquid was squeeze cast under an applied pressure of 90 MPa. The results of mechanical testing on the squeeze cast Mg-Zn alloys shows that Zn is an effective additive for enhancing their mechanical properties, specifically, tensile and yield strengths at room temperature, but reducing the elongation. While the Zn addition rises from 1.0 to 10.0 wt.%, the ultimate tensile and yield strengths increases to 181.0 MPa and 105.0 MPa from 140.7 MPa and 39.3 MPa, while the elongation-to-failure (e f ) decreases to 3.7% from 6.2%, respectively. The reveal of the as-cast grain structure by an optical microscope (OM) indicates that the high Zn content reduces grain sizes considerably. The microstructures analyzed by a scanning electron microscope (SEM) with the energy dispersive spectroscopy (EDS) show that the secondary MgZn phase forms once Zn is introduced in sufficient amount. The grain refinement and the massive presence of the secondary MgZn phase at the boundaries of the refined grains should be responsible to the enhancement of the strengths and the reduction in the elongation. The developed pressurized casting without employing secondary manufacturing processes such as extrusion or heat treatment exhibits its advantages to enhance the mechanical properties of the Mg alloys with high Zn content over conventional fabrication processes, since high Zn-containing Mg alloys have a long freezing range and tend to form microshrinkage porosity.

Fabrication and Pore Structure of Directionally Solidified Porous Mg-Zn Alloy

Pore structure of porous Mg-1Mn-xZn alloy fabricated by metal–gas eutectic unidirectional solidification

Fabrication of Lotus-Type Porous Mg−Mn Alloys by Metal/gas Eutectic Unidirectional Solidification

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Effects of Alloying Element and Pore Structure on Mechanical Property and Corrosion Properties of Gasar Mg Alloys

Compressive and Corrosion Properties of Lotus-Type Porous Mg-Mn Alloys Fabricated by Unidirectional Solidification

Squeeze Cast Mg-Zn Alloys for Bioapplications: Tensile Properties and Microstructure

The Properties Evolution of Medical Mg–Zn Alloys Prepared by Semi-solid Powder Moulding

Solidification of Mg–Zn–Zr Alloys: Grain Growth Restriction, Dendrite Coherency and Grain Size

Semi-solid powder moulding for preparing medical Mg–3Zn alloy, microstructure evolution and mechanical properties

Additive manufacturing of biodegradable Zn-xMg alloys: Effect of Mg content on manufacturability, microstructure and mechanical properties

Synthesis, microstructure and mechanical properties of porous Mg--Zn scaffolds

Evaluation of Porosity in Lotus-Type Porous Magnesium Fabricated by Metal/Gas Eutectic Unidirectional Solidification

Effect of hydrogen pressure on pore growth and microstructure of GASAR porous Mg–Ag eutectic alloys

Characterization of Porosity and Its Effect on the Tensile Properties of Mg-6Gd-3Y-0.5Zr Alloy

Micromechanisms of Medical Mg-Zn alloys during Semi-solid powder forming (SPF)

Microstructures and Properties of Biomedical Mg-Zn-Sn-Zr Rolled Alloys

Comparative Study of Solid-Solution Treatment and Hot-Extrusion on Hydrogen Storage Performance for Mg96Y2Zn2 Alloy: the Nonnegligible Role of Elements Distribution

Microstructure and hydrogen storage properties of Mg–Sn nanocomposite by mechanical milling

Heterogeneous Fiberous Structured Mg-Zn-Zr Alloy with Superior Strength-Ductility Synergy

Construction of Mg/Zr superlattice structure to achieve efficient hydrogen storage via atomic-scale interaction in Mg-Zr modulation films