Abstract:Aerodynamic modeling and control law design methods are crucial foundational technologies that enable efficient maneuvering flight of aircraft. Hence, this study focuses on how to construct the aerodynamic model and design control law using machine learning, as well as their differences from classical methods. To conduct this, a modified NACA0012 airfoil with a tail functioning as an elevator is employed as the geometry model. Through the utilization of the rigid dynamic grid method and overlapping grid technology, the pitch of the airfoil and the deflection of the elevator are efficient to execute. Firstly, the pitching moment coefficient is sampled through both steady and unsteady computations. Then, multivariate nonlinear regression (MNR) models and artificial neural network (ANN) models are established based on steady and unsteady sampling data, respectively. Additionally, the obtained model is evaluated using open‐loop control laws. Based on the evaluation, the proportional‐integral‐derivative (PID) control algorithm is used to design the airfoil pitching control law using the MNR model. Meanwhile, deep reinforcement learning (DRL) is used to design the pitching control law using the ANN model. Finally, the PID and DRL controllers are implemented in a CFD environment for airfoil pitching control to verify their effectiveness in application scenarios. The results suggest that models based on both steady and unsteady data can reflect dynamic aerodynamic characteristics. However, using unsteady computation for data sampling significantly reduces time consumption compared to steady computation. Furthermore, the model constructed by ANN may have unexpected excellent characteristics. Both the PID and DRL control laws, designed based on the models, perfectly complete the control process in the CFD environment. This study provides valuable insights for the implementation of controllable maneuvering flight in aircraft.

Aerodynamic Surrogate Model Based on Deep Long Short-Term Memory Network: an Application on High-Lift Device Control

Unsteady Flow Simulation of a Variable-Sweep Morphing Aircraft Coupled with Flight Control System

Sliding mode control of trajectory tracking for underactuated aerostat

Deep Learning Based Adaptive Deformation of Aerodynamic Shape for Ducted Propellers

Incorporating Physical Models for Dynamic Stall Prediction Based on Machine Learning

LSTM-NN Yaw Control of Wind Turbines Based on Upstream Wind Information

Hypersonic Glide Vehicle Tracking Guidance Using L1 Adaptive Controller in the Presence of Input Saturation

Rapid prediction of unsteady aerodynamic characteristics of flapping wing based on GRU

Surrogate Modeling of Aerodynamic Simulations for Multiple Operating Conditions Using Machine Learning

Application of deep learning based multi-fidelity surrogate model to robust aerodynamic design optimization

Application of a PCA-DBN-based Surrogate Model to Robust Aerodynamic Design Optimization

A Study of Multi-Objective Aerodynamic Optimization Design for Variable Camber Airfoils and High Lift Devices

Neural Longitudinal Control of Hypersonic Vehicles with Constrained Aerodynamic Surfaces

Improved Surrogate Modeling using Machine Learning for Industrial Civil Aircraft Aerodynamics

A Weighted Feature Fusion Model for Unsteady Aerodynamic Modeling at High Angles of Attack

A Weighted Hybrid Model For Unsteady Nonlinear Aerodynamics

Hybrid Aerodynamics-Based Model Predictive Control for a Tail-Sitter UAV

Knowledge-embedded meta-learning model for lift coefficient prediction of airfoils

Comparison of Machine Learning and Classic Methods on Aerodynamic Modeling and Control Law Design for a Pitching Airfoil

Enhancement of Unsteady and 3D Aerodynamics Models using Machine Learning

Aeroservoelastic model based active control for large civil aircraft