Abstract:In view of the large temperature rise and impact load of thrust bearings in the main shaft system of large wind turbines, this article takes the circular tilting pad thrust bearings in large wind turbines as the research object, and analyses the basic theory of bearing lubrication. The lubrication performance calculation model established for this bearing includes the Reynolds equation, energy equation, film thickness equation, and elastic deformation equation. Theoretically analysing and calculating the lubrication performance of the circular tilting pad thrust bearing, the key performance parameters have identified such as minimum film thickness (hmin), temperature rise (ΔT), power consumption (W), and flow rate (Q). The calculation results show that the eccentricity ratio has a significant impact on the lubrication performance of the circular tilting pad thrust bearing. When both radial and circumferential eccentricity ratios are around 0.5, the bearing exhibits a high temperature rise, leading to a potential risk of bearing burnout. The results also show that at a radial eccentricity ratio of approximately 0.54, the minimum film thickness reaches its maximum value of 10.34 μm. Similarly, at a circumferential eccentricity ratio of about 0.60, the minimum film thickness reaches its peak value of 21.89 μm. This indicates that the eccentricity ratio plays a crucial role in the lubrication performance. In addition, the lubrication performance of the bearing under varying loads has been calculated at a speed of 9.5 r/min. The results demonstrated that the applied load significantly impacts the thrust bearing's performance. The findings elucidate the critical role of considering the eccentricity ratio and operational external load during the bearing design process. This study validates the potential of replacing rolling bearings with sliding bearings in wind turbine main shafts. It also provides a theoretical reference for the future design of sliding bearings.

Study on the Influence of Thrust Plate Tilt on Performance of Distributed Hybrid Thrust Bearing with Tilting Pad

A Study of Linear and Non-linear Dynamic Performance for Tilting-Pad Thrust Bearing

The Influence of Tilting-Pad Number on Static and Dynamic Characters of Large Scale Tilting-Pad Bearing

Experimental Study on Multi-Decked Protuberant Foil Thrust Bearing with Different Number of Thrust Pads

Study on the thermoelastohydrodynamic performance of tilting-pad bearings for large-scale power units

Analysis of transient and static lubrication performance of tilting pad thrust bearing considering pivot deformation

Research of Sharing Load and Influencing Factors of Tilting-Pad Thrust Bearing with Adaptive Equalizing Beams Supported

Inclination angle effect of tribological performance for hydrostatic bearing having tilting oil pad under variable viscosity conditions

Theoretical and Experimental Study on the Axial Oil Film Stiffness of Tilting Pad Thrust Bearings

Research on the lubrication performance of circular tilting pad thrust bearings for large wind turbines

Numerical simulations for the fluid-thermal-structural interaction lubrication in a tilting pad thrust bearing

The Influence Of Pad Pivot Elastic Deformation On Static And Dynamic Coefficients For Fixed-Tilting Pad Journal Bearing

The Study on Static Attribute of Tilting Pad Thrust Bearing with Thermal Elasto Hydrodynamic Lubrication under Steady Load

The Method and Calculation Model of Dynamic Performances of Oil-film of Tilting-pad Bearing

Performance Analysis of Tilting Pad Journal Bearing Considering Base Flexibility

Study on Static and Dynamic Characteristics of Tilting Pad Thrust Bearings with Journal Inclination

Dynamic performances of novel misaligned non-uniform distributed tilting-pad bearing

Study on the Water Lubricated Large-scale Tilting Pad Thrust Bearing by Finite Element Method

A novel transient computational fluid dynamics-fluid–structure interaction model for the pad adaptive motion and rotordynamic coefficients of hybrid porous tilting pad bearings

Influence Of Bearing Load On The Performance Of Tilting-Pad Journal Bearing Under High Surface Velocity

Performance Analysis of High-Stiffness Bearing Composited by Hydrostatic Cavities and Tilting Pads with Preload