Abstract:Abstract This paper analyses the flow characteristics and oil-air distributions of oil flows in a tilting-pad journal bearing under different bearing loads. This titling-pad journal bearing is working at 3000 rpm rotation speed and its minimum film thicknesses have been measured under different loads from 180 kN to 299 kN. Based on the previous researches of this bearing under 180 kN, the gaseous cavitation and low-turbulence flow exists in this bearing flow. A suitable gaseous cavitation model and the SST model with low-Re correction are used in the film flow simulations. With the rotor and pads assumed to be rigid, the dynamic mesh and motion equations are applied to simulate the motions of the rotor and the rotations of the pads. Based on the simulation results under different bearing loads, the simulated minimum film thicknesses agrees well with the measured data. It indicates that the simulation results can catch the film geometries and flows correctly. With the load increasing, the rotor moves closer to the loaded pads and the minimum film thickness decreases. Taking the effect of boundary layers into consideration, the turbulence has a negative relationship with the film thickness and decreases in the loaded area under higher bearing load. It can be verified by the simulated lower turbulent viscosity ratio distributions in the loaded pads. In the unloaded area, both the film thickness and turbulence viscosity ratio are positively related to the bearing loads. Thus, the higher bearing load may lead the flow to be more different in the loaded and unloaded area, and the turbulence in the loaded pads may transfer to laminar in the end. As for the oil-air distributions, in the unloaded pads, with the bearing load increasing, the simulated air volume fraction increases in the unloaded pads with lower pressure. It should be caused by the higher film thickness of the unloaded pads under higher loads. In sum, the flow turbulence and cavitation process changes with the bearing load. With a higher load, the cavitation becomes more in the unloaded pads and the flow changes sharper from the high-turbulence unloaded area to the low-turbulence loaded area. As the simulation results is in good accordance with the experimental data, the SST model with low-Re correction and the gaseous cavitation model are verified to be suitable for bearing film simulations under different loads.

Theoretical and Experimental Study on the Axial Oil Film Stiffness of Tilting Pad Thrust Bearings

Theoretical and Experimental Study on the Static and Dynamic Characteristics of Tilting-Pad Thrust Bearing

Numerical simulations for the fluid-thermal-structural interaction lubrication in a tilting pad thrust bearing

Experimental Study on Multi-Decked Protuberant Foil Thrust Bearing with Different Number of Thrust Pads

Research on the lubrication performance of circular tilting pad thrust bearings for large wind turbines

Investigation on Axial Displacement Fault Mechanism Based on Dynamic Characteristic Coefficients Identification of Tilting-Pad Thrust Bearing

Analysis of transient and static lubrication performance of tilting pad thrust bearing considering pivot deformation

Asymmetry Characteristic of Tilting-Pad Thrust Bearing During the Start-Up and Shut-Down Process

CFD analysis for static and dynamic characteristics of hydrodynamic thrust bearings

Research on the Support Performance of Internal Feedback Hydrostatic Thrust and Journal Bearing Considering Load Effect

Inclination angle effect of tribological performance for hydrostatic bearing having tilting oil pad under variable viscosity conditions

Investigation on static and dynamic characteristics of high-speed and heavy-load tilting pad journal bearings

Numerical Investigation for Characteristics and Oil-Air Distributions of a Tilting-Pad Journal Bearing Under Different Loads

A novel transient computational fluid dynamics-fluid–structure interaction model for the pad adaptive motion and rotordynamic coefficients of hybrid porous tilting pad bearings

An analytical model for complete dynamical coefficients of a tilting-pad journal bearing

Simulation and Experimental Verification of Dynamic Characteristics on Gas Foil Thrust Bearings Based on Multi-Physics Three-Dimensional Computer Aided Engineering Methods

Theoretical and Experimental Investigations on Directly Lubricated Tilting Pad Journal Bearing under Starved Lubrication

Static and Dynamic Characteristics of Aerodynamic Thrust Bearings Based on Fluid-Thermal-structural Interaction Approach

The fluid-thermal-structural interaction analysis of a new multifoil aerodynamic thrust bearings

Thermo-hydrodynamic Lubrication and Energy Dissipation Mechanism of a Pump-Turbine Thrust Bearing in Load-Rejection Process

Nonlinear tribo-dynamic performance and transient stability for marine dynamically loaded offset-halves journal bearings