Abstract:Ultrasonic surface rolling processing (USRP) was performed on a Mg–Y–Nd–Zr alloy after equal-channel angular pressing. The result shown that the surface roughness was significantly improved, residual stress was introduced to the topmost surface, and ~450 μm gradient nanostructure (GNS) of Mg alloys was obtained after USRP treatment. The mechanism of microstructure evolution and its effect on the mechanical properties of the Mg alloy were studied in detail. There are multiple deformation mechanisms in grain refinement. In the initial stage, the coarse-grain (CG) matrix was subdivided by {10 1̅ 2} extension twins. Subsequently, the deformed grains were refined into substructures using interaction between twins, interaction between twins and dislocations, and dislocation entanglement. Moreover, the substructure contains a high density of multiple stacking faults and dislocation arrays, which can effectively block dislocation movement and promote dislocation packing. Finally, equiaxed nanograins (NGs) with high-angle grain boundaries were formed via subcrystal rotation recrystallization. With the formation of a GNS, the strength of the Mg–Y–Nd–Zr alloy considerably increased at the expense of a small amount of plasticity. The tensile test results demonstrated that the yield strength (YS) and ultimate tensile strength (UTS) of the Mg–Y–Nd–Zr alloy increased from 171.96 and 262.47 MPa to 216.06 and 330.61 MPa, respectively, and the elongation rate decreased from 20.52% to 14.65% after the USRP treatment. The YS improvement of the Mg–Y–Nd–Zr alloy after the USRP treatment was attributed to grain boundary strengthening, synergistic strengthening, dislocation strengthening, and twin strengthening. Furthermore, the microhardness of Mg–Y–Nd–Zr considerably improved after USRP treatment, and grain refinement was the primary surface strengthening mechanism of the Mg–Y – Nd – Zr alloy after the USRP treatment. The work-hardening capacity of the Mg alloy improved after the USRP treatment, and the synergistic deformation between GNS and CG matrix was the primary reason for the excellent work-hardening capacity of the Mg–Y–Nd–Zr alloy.

Distributions of Grains and Precipitates in Gradient Lamellae Al–Zn–Mg–Cu Alloy by Ultrasonic Surface Rolling Processing

Formation Mechanism of Surface Gradient Microstructure and Mechanical Properties Evolution of Mg-Y-Nd-Gd-Zr Alloy by Ultrasonic Rolling

Effect of ultrasonic surface rolling process on microstructure and properties of rolled Mg-Y-Nd-Zr alloy

Study on Microstructure Evolution Mechanism of Gradient Structure Surface of AA7075 Aluminum Alloy by Ultrasonic Surface Rolling Treatment

Evolution Mechanism for a Surface Gradient Nanostructure in GH4169 Superalloy Induced by an Ultrasonic Surface Rolling Process

Microstructural Evolution of Al-Zn-Mg-Cu Alloy During Ultrasonic Surface Rolling Process

Thermal Stability of Nanocrystalline Surface Layer in an Aged Al–Zn–Mg–Cu Alloy Induced by Ultrasonic Surface Rolling Processing

Fabrication of a Gradient Nano-/Micro-structured Surface Layer on an Al–Si Casting Alloy by Means of Ultrasonic–Electropulsing Coupling Rolling Process

Effect of microstructure evolution on the mechanical properties of a Mg–Y–Nd–Zr alloy with a gradient nanostructure produced via ultrasonic surface rolling processing

A New Approach of a Gradient Nanograined Surface Layer for Mg-3Al-1Zn Alloy Induced by SMRGT

Tailoring A Gradient Nanostructured Age-Hardened Aluminum Alloy Using High-Gradient Strain and Strain Rate

Preparation of Gradient Nanostructured Cu–Al Alloy Matrix and Evolution Microstructure and Properties

Microstructure Evolution and Formation of Gradient Structure in Zr Upon Surface Corrugation Rolling Treatment

Effect of the Precipitated Phase of MgZn2 on Surface Nanocrystallization of Al-Zn-Mg Alloy Based on High-Frequency Impacting and Rolling

Microstructures and mechanical properties of Mg-15Gd-1Zn-0.4Zr alloys treated by ultrasonic surface rolling process

Mechanical and corrosion fatigue behaviors of gradient structured 7B50-T7751 aluminum alloy processed via ultrasonic surface rolling

Preparing Thick Gradient Surface Layer in Cu-Zn Alloy via Ultrasonic Severe Surface Rolling for Strength-Ductility Balance

Surface Characteristics and Fatigue Behavior of Gradient Nano-Structured Magnesium Alloy

Gradient Nanostructure Evolution and Phase Transformation of Α Phase in Ti-6Al-4V Alloy Induced by Ultrasonic Surface Rolling Process

Effect of Ultrasonic Surface Rolling Process on Wear Behavior of Mg-15Gd-1Zn-0.4Zr Alloy

Strength and Ductility with Dual Grain-Size and Texture Gradients in AZ31 Mg Alloy