Abstract:Ultrasonic surface rolling processing (USRP) was performed on a Mg–Y–Nd–Zr alloy after equal-channel angular pressing. The result shown that the surface roughness was significantly improved, residual stress was introduced to the topmost surface, and ~450 μm gradient nanostructure (GNS) of Mg alloys was obtained after USRP treatment. The mechanism of microstructure evolution and its effect on the mechanical properties of the Mg alloy were studied in detail. There are multiple deformation mechanisms in grain refinement. In the initial stage, the coarse-grain (CG) matrix was subdivided by {10 1̅ 2} extension twins. Subsequently, the deformed grains were refined into substructures using interaction between twins, interaction between twins and dislocations, and dislocation entanglement. Moreover, the substructure contains a high density of multiple stacking faults and dislocation arrays, which can effectively block dislocation movement and promote dislocation packing. Finally, equiaxed nanograins (NGs) with high-angle grain boundaries were formed via subcrystal rotation recrystallization. With the formation of a GNS, the strength of the Mg–Y–Nd–Zr alloy considerably increased at the expense of a small amount of plasticity. The tensile test results demonstrated that the yield strength (YS) and ultimate tensile strength (UTS) of the Mg–Y–Nd–Zr alloy increased from 171.96 and 262.47 MPa to 216.06 and 330.61 MPa, respectively, and the elongation rate decreased from 20.52% to 14.65% after the USRP treatment. The YS improvement of the Mg–Y–Nd–Zr alloy after the USRP treatment was attributed to grain boundary strengthening, synergistic strengthening, dislocation strengthening, and twin strengthening. Furthermore, the microhardness of Mg–Y–Nd–Zr considerably improved after USRP treatment, and grain refinement was the primary surface strengthening mechanism of the Mg–Y – Nd – Zr alloy after the USRP treatment. The work-hardening capacity of the Mg alloy improved after the USRP treatment, and the synergistic deformation between GNS and CG matrix was the primary reason for the excellent work-hardening capacity of the Mg–Y–Nd–Zr alloy.

Simultaneously improving tensile properties and stress corrosion cracking resistance of 7075-T6 aluminum alloy by USRP treatment

Achieving excellent corrosion resistance properties of 7075 Al alloy via ultrasonic surface rolling treatment

Mechanical and corrosion fatigue behaviors of gradient structured 7B50-T7751 aluminum alloy processed via ultrasonic surface rolling

7075 aluminum alloy induced by ultrasonic surface rolling: grain refinement and residual stress model analysis and evaluation

Effect of ultrasonic surface rolling process on the fatigue performance of the 7075 aluminum alloy

Achieving superior strength and ductility in 7075 aluminum alloy through the design of multi-gradient nanostructure by ultrasonic surface rolling and aging

Study on Microstructure Evolution Mechanism of Gradient Structure Surface of AA7075 Aluminum Alloy by Ultrasonic Surface Rolling Treatment

Electrochemical corrosion behavior of 7075 aluminum alloy with different ultrasonic surface rolling microstructures

Effect of Ultrasonic Surface Rolling Process on Surface Properties and Microstructure of 6061 Aluminum Alloy

Surface Properties and Fatigue Behavior of 6061 Aluminum Alloy by Multi-pass Ultrasonic Surface Rolling Process

Effects of Ultrasonic Rolling on Surface Performance of 7B85-T6 Alloy

Simultaneously improving mechanical properties and corrosion resistance of as-cast AZ91 Mg alloy by ultrasonic surface rolling

Effects of Ultrasonic Surface Rolling on the Localized Corrosion Behavior of 7B50-T7751 Aluminum Alloy

Enhancing Stress Corrosion Cracking Resistance of Low Cu-Containing Al-Zn-Mg-Cu Alloys by Aging Treatment Control

Effect of microstructure evolution on the mechanical properties of a Mg–Y–Nd–Zr alloy with a gradient nanostructure produced via ultrasonic surface rolling processing

Enhanced Corrosion Resistance of a Cu10Ni Alloy in a 3.5 Wt% NaCl Solution by Means of Ultrasonic Surface Rolling Treatment

Effect of ultrasonic surface rolling process on microstructure and properties of rolled Mg-Y-Nd-Zr alloy

Enhanced fatigue performance of aluminum alloy through surface strengthening treatment

Enhanced Corrosion Behavior and Mechanical Properties of Al-Zn-Mg-Cu Sheet Alloy by Ultrasonic Surface Rolling Treatment

On the influence of ultrasonic surface rolling process on surface integrity and fatigue performance of Ti-6Al-4V alloy

Effect of ultrasonic surface rolling process on mechanical properties and corrosion resistance of AZ31B Mg alloy