Abstract:The health monitoring and damage detection of structures are major scientific issues that the civil engineering discipline, which made great achievements in the 20 th century, has bequeathed to the 21 st century. Despite the installation of health monitoring systems in many large structures, implementing damage detection through finite element model updating is often time-consuming or even infeasible due to the size of the model and the presence of numerous uncertain parameters. To address this issue, this paper proposes a substructure-based model updating method. The entire structure is divided into substructures with reduced degrees of freedom, allowing for the simplification of the motion equation by employing only a small number of low-order modes from each substructure. Consequently, the analysis scale of the structure is effectively reduced. The discarded higher modes are compensated by residual modes to ensure the accuracy of structural response and sensitivity. Subsequently, a damage identification program substructure-based model updating is developed, which is applied to component mode synthesis and damage identification for large structures. By precisely detecting damage in critical areas, accurate diagnosis and evaluation of the global structural safety are achieved. The results validate the implementation, computational efficiency, and accuracy of the proposed substructure-based model updating method. This approach shifts the focus from model updating of the entire structure to model updating of substructures, with the aim of fundamentally resolving the technical challenge of accurate damage detection of large and complex structures. Furthermore, it provides theoretical support for the practical application of damage detection in large civil structures.

Safety assessment of existing pin-jointed grid structures with crooked members using static model updating

FE Model Updating of Grid Structure Considering Deformation of Crooked Members

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Refined Safety Assessment of Steel Grid Structures with Crooked Tubular Members

Automated inspection and monitoring of member deformation in grid structures

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

Model Updating and Damage Detection Using Cross Model Cross Mode Method for 3D Frame Structures

Structural modal identification and MCMC-based model updating by a Bayesian approach

Damage Detection and Rehabilitation on A Curvilinear Steel Box Girder Bridge by Multistage Model Updating

A Substructure-based Model Updating Method to Damage Detection for Large-scale Structures

Structural performance assessment of RC flexural members through crack-based fibre beam-column model updating

Structural safety assessment of a grid structure as the roof of a swimming hall

Mechanical Properties Analysis and Design Method for Grid Structures under Fire Conditions

Dynamic Response Analysis of Semi-Rigid Steel Frame with a Key Column Destroyed

Dynamic Assessment of Curved Cable-Stayed Bridge by Model Updating

Deformation and internal force of multitower suspension bridges: Numerical modeling and analytical analysis

Programmatic model updating of damaged structures using modified SERR method

Updating finite element model of structures with semi-rigid joints and boundary

Model updating experiment of space truss using global and local dynamic information

Selective online model updating in hybrid simulation of a full‐scale steel moment frame

Structural Model Updating Study in Consideration of Complex Pre-Stress Distribution