Abstract:Surface plasmon resonance (SPR) optical fiber biosensors can be used as a cost-effective and relatively simple-to-implement alternative to well established bulky prism configurations for high sensitivity biological sample measurements. The miniaturized size and remote operation ability offer them a multitude of opportunities for single-point sensing in hard-to-reach spaces, even possibly in vivo. The biosensor configuration reported in this work uses a tilted fiber Bragg grating (TFBG) in a commercial single mode fiber coated with a nanometer scale silver film. The key point is that by reducing the silver film thickness to around 20–30nm (rather than 50nm for optimal SPR excitation), different modes of the TFBG spectrum present very high but opposite sensitivities to refractive index (RI) changes around the TFBG. Experimental results obtained with the coated TFBG embedded inside a microfluidic channel show an amplitude sensitivity greater than 8000dB/RIU (Refractive Index Unit) and a limit of detection of 10−5RIU. Using this device, the effect of different concentrations of protein in rat urine was clearly differentiated between healthy samples, nephropatic samples and samples from individuals under treatment, with a protein concentration sensitivity of 5.5dB/(mg/ml) and a limit of detection of 1.5×10−3mg/ml. Those results show a clear relationship between protein outflow and variations in the RI of the urine samples between 1.3400 and 1.3408, pointing the way to the evaluation and development of new drugs for nephropathy treatments. The integration of TFBGs with microfluidic channels enables precise measurement control over samples with sub-microliter volumes and does not require accurate temperature control because of the elimination of the temperature cross-sensitivity inherent in TFBG devices. Integration of the TFBG with a hypodermic needle on the other hand would allow similar measurements in vivo. The proposed optical fiber/microfluidic plasmonic biosensor represents an appealing solution for rapid, low consumption and highly sensitive detection of analytes at low concentrations in medicine as well as in chemical and environmental monitoring.

-Moo3 Based Tunable Fabry-Perot Cavity Colorimetric Biosensor

Numerical Study of Biosensor Based on Α-Moo3/au Hyperbolic Metamaterial at Visible Frequencies

A Tunable Ultrasensitive Plasmonic Biosensor Based on Α-Moo3/graphene Hybrid Architecture

Three-dimensional cavity-coupled metamaterials for plasmonic color and real-time colorimetric biosensors

Analysis and Design of Refractive Index Biosensors Based on Single Silicon Nanobeam Cavity

A White-Light Source Operated Polymer-Based Micromachined Fabry-Perot Chemo/biosensor

Highly Sensitive Detection of Urinary Protein Variations Using Tilted Fiber Grating Sensors with Plasmonic Nanocoatings.

Uncooled Infrared Detection with Two-Color Microbolometers Using A Micro-Optoelectromechanical Systems Tunable Micromirror

Research on L3 Photonic Crystal Cavity Sensor Integrated with Microfluidic Channel in the Visible Frequency

Temperature Tunable Multiple Ultraviolet to Near-Infrared Perfect Absorption As Highly Sensitive Metamaterial Biosensor

MOF-based colorimetric sensor for rapid and visual readout of trace acetylene

Microsphere Sensitized Fiber Optic SPR Biosensor for Refractive Index Detection

A Reversible Tuning of High Absorption in Chalcogenide-Metal Stacked-Layer Structure and Its Application for Multichannel Biosensing

A Novel Biosensor Based on Molybdenum Disulfide (mos2 ) Modified Porous Anodic Aluminum Oxide Nanochannels for Ultrasensitive Microrna-155 Detection.

Microstructured Optical Fiber for Multichannel Sensing Based on Fano Resonance of the Whispering Gallery Modes

Biochemical sensor based on thin covering layer long period fiber grating coupling resonant cavity

A Liquid Crystal-Modulated Metastructure Sensor for Biosensing.

Numerical Analysis of Multifunctional Biosensor with Dual-Channel Photonic Crystal Fibers Based on Localized Surface Plasmon Resonance

Efficient Optical Biochemical Sensor with Slotted Bragg-grating-based Fabry–Perot Resonator Structure in Silicon-on-insulator Platform

An Ultra-Low Detection-Limit Optofluidic Biosensor With Integrated Dual-Channel Fabry-Perot Cavity

Tunable Mode Coupler in the Microfluidic Channel for the Fiber Optics Refractive Index Sensor