Abstract:The container vehicle-truss bridge coupled vibration greatly affects the automated container terminals' (ACT) structural safety and handling efficiency. Using free-interface component mode synthesis (CMS) method, the coupled vibration time-domain responses, under self-excitation including track irregularity and hunting movement as well as environmental excitations such as wind and seismic load, were obtained. Stochastic simulation of track irregularity and fluctuating wind time-history was generated based on the numerical simulation method of multidimensional homogeneous process. A scale model test was introduced to validate the CMS method's effectiveness and vehicle speed's influence on coupled vibration response. In this case, the vehicle-bridge vertical vibration is caused mainly by the vehicle moving load, and self-excitation is a major factor. Wind, seismic load will greatly enhance the lateral vibration. And the sensitivity of the response to the seismic load is greater than operational wind load. As vehicle velocity, fluctuating wind mean velocity or ground motion intensity increase, the responses increase. Then, the structural safety, running safety and stability were assessed by the indicators such as deflection-span ratio, acceleration response etc., under wind load only and under operational wind and ground motion excited simultaneously. It is proved by both prototype simulation and model test results that, lead rubber bearing (LRB) can effectively reduce the acceleration response of both the vehicle and the bridge; therefore, can raise vehicle speed limits for structural and running safety.

Dynamic Investigation of a Seven-Tier Container Stack with Different Lashing Arrangements Subject to Rolling and Pitching Excitation

Experimental and Numerical Investigation on Dynamic Response of a Four-Tier Container Stack and Lashing System Subject to Rolling and Pitching Excitation

Investigations on the dynamics of container stack and securing system under rolling motion using a scaled model test

Experimental and Numerical Investigation of Lashing Bridge and Container Stack Dynamics Using a Scaled Model Test

Numerical Simulation of Container Stacks Dynamics Under Typical Motion Excitation

Numerical Analysis and Experimental Study on the Scaled Model of a Container Ship Lashing Bridge

Dynamic Response Analysis of Deployable Lifting Construction Process of Reticulated Shell Structures

Experimental and Numerical Investigation on the Scaled Model of Lashing Bridge Coupled with Hull Structure and Container Stack

Simulation of Assembling Cargo-Hold Spaceship Pallets

Safety and stability analysis of the ship loader during shipping

Experimental and Numerical Analysis of Supporting Forces and Lashing Forces in a Ship Cargo Securing Scheme

Dynamic Analysis of the Structure of a Container Ship

On the estimation of the design loads on container stacks due to excessive acceleration in adverse weather conditions

Container Vehicle-Truss Bridge Coupled Vibration Analysis and Structural Safety Assessment under Stochastic Excitation

Dynamic Analysis of Flexible Containers under Impact

Study on Wind Load Characteristics for a Container Ship under Different Stacking Modes

The Method of Safety Examination and Assessment for the Container Crane in Service

Investigation of Container Ship Structural Dynamic Ultimate Strength Under Combined Bending, Torsion and Lateral Pressure

A novel method for evaluating load restraint assemblies to ensure the safety of railway freight transportation

Knowledge-Based Engineering–based Method for Containership Lashing Bridge Optimization Design and Structural Improvement with Functionally Graded Thickness Plates

Surveying Key Points of Lashing Bridges on 9400 TEU Container Ship