Abstract:The container vehicle-truss bridge coupled vibration greatly affects the automated container terminals' (ACT) structural safety and handling efficiency. Using free-interface component mode synthesis (CMS) method, the coupled vibration time-domain responses, under self-excitation including track irregularity and hunting movement as well as environmental excitations such as wind and seismic load, were obtained. Stochastic simulation of track irregularity and fluctuating wind time-history was generated based on the numerical simulation method of multidimensional homogeneous process. A scale model test was introduced to validate the CMS method's effectiveness and vehicle speed's influence on coupled vibration response. In this case, the vehicle-bridge vertical vibration is caused mainly by the vehicle moving load, and self-excitation is a major factor. Wind, seismic load will greatly enhance the lateral vibration. And the sensitivity of the response to the seismic load is greater than operational wind load. As vehicle velocity, fluctuating wind mean velocity or ground motion intensity increase, the responses increase. Then, the structural safety, running safety and stability were assessed by the indicators such as deflection-span ratio, acceleration response etc., under wind load only and under operational wind and ground motion excited simultaneously. It is proved by both prototype simulation and model test results that, lead rubber bearing (LRB) can effectively reduce the acceleration response of both the vehicle and the bridge; therefore, can raise vehicle speed limits for structural and running safety.

Investigations on the dynamics of container stack and securing system under rolling motion using a scaled model test

Experimental and Numerical Investigation on Dynamic Response of a Four-Tier Container Stack and Lashing System Subject to Rolling and Pitching Excitation

Dynamic Investigation of a Seven-Tier Container Stack with Different Lashing Arrangements Subject to Rolling and Pitching Excitation

Numerical Simulation of Container Stacks Dynamics Under Typical Motion Excitation

Experimental and Numerical Investigation of Lashing Bridge and Container Stack Dynamics Using a Scaled Model Test

Numerical Analysis and Experimental Study on the Scaled Model of a Container Ship Lashing Bridge

Experimental and Numerical Investigation on the Scaled Model of Lashing Bridge Coupled with Hull Structure and Container Stack

Experimental Study on Dynamical Characteristics of Ship Lift System

Dynamic Experimental Investigation On The Self-Vibration Characteristics Of Liquid Storage Tanks Under Seismic Excitations

Dynamic Analysis of the Structure of a Container Ship

Experimental and Numerical Analysis of Supporting Forces and Lashing Forces in a Ship Cargo Securing Scheme

Dynamic Analysis of Flexible Containers under Impact

On the estimation of the design loads on container stacks due to excessive acceleration in adverse weather conditions

Springing loads analysis of large‐scale container ships in regular waves

Container Vehicle-Truss Bridge Coupled Vibration Analysis and Structural Safety Assessment under Stochastic Excitation

Experimental Study on the Asymmetric Impact Loads and Hydroelastic Responses of a Very Large Container Ship

Study on Wind Load Characteristics for a Container Ship under Different Stacking Modes

Investigation on Time-Domain Simulation and Experiment of Harmonic Rolling of Ultra-Large Container Ship in Waves

Dynamic response of flexible container during the impact with the ground

Key Influencing Factors in Ultimate Strength Analysis for Large Container Ships

Investigation of Container Ship Structural Dynamic Ultimate Strength Under Combined Bending, Torsion and Lateral Pressure