Abstract:Sandwich structures and porous materials have been applied widely in various fields due to their excellent mechanical performance, and multifunctional composites will have a significant engineering demand in the future. Studying damped composites' mechanical properties and failure forms has significant engineering value and significance. However, the current connecting processes for sandwich panels and porous materials must be improved. Therefore, to explore the ambiguity of the connection interface between the core material and panel in sandwich panels, as well as the mechanical properties of such structures, a sandwich panel with a metal rubber core material was prepared using vacuum brazing and cementing processes. Microscopic examinations using scanning electron microscopy and energy-dispersive spectroscopy were conducted to observe the physical bonding mechanism at the interface of the sandwich panel. The results indicate that the brazed sandwich panels exhibited a more uniform and continuous interface than the cemented sandwich panels. This work designs three-point bending compression experiments to investigate the effects of core material thickness, density, and preparation process on the bending mechanical properties of the sandwich panel. Failure modes of the sandwich panel during the experiments are analyzed. The experimental results show that the failures of the brazed sandwich panels are attributable to the bending deformation of the panel and the shear failure of the metal wire core material. The cemented sandwich panels exhibit separation failures in the area below the indenter and at both ends of the panel. The core material's thickness and density significantly influence the bending performance of the sandwich panels. An increase in the core material's thickness and density effectively enhances the sandwich panels' peak load and energy absorption capacity.

Experimental and Theoretical Research on Four-Point Bending Performance of Nomex Honeycomb Sandwich Panels

Mechanical responses of a composite sandwich structure with Nomex honeycomb core

Study on Three-Point Bending Mechanical Performance of Thin-Walled Super Alloy Honeycomb Sandwich with Penetrable Defects

Experimental and Numerical Investigation of Static and Fatigue Behaviors of Composites Honeycomb Sandwich Structure

Failure analysis of brazed sandwich structures with square honeycomb-corrugation hybrid cores under three-point bending

Bending Performance of Carbon Fiber–reinforced Polymers/aluminum Sandwich Structure with Different Forming Process and Analysis of Failure Mode

Three-point bending behaviors of the foam-filled CFRP X-core sandwich panel: Experimental investigation and analytical modelling

On the mechanical performance of honeycomb-core sandwich L-joint under bending load: an experimental-numerical study

Experimental Study on Mechanical Properties of the Sandwich Composite Structure Reinforced by Basalt Fiber and Nomex Honeycomb

Experimental Investigation of the Three-Point Bending Property of a Sandwich Panel with a Metal Rubber Core

A numerical study on bending behavior of sandwich beam with novel auxetic honeycomb core

Mechanical Performance of Foam-Filled Lattice Composite Panels in Four-Point Bending: Experimental Investigation and Analytical Modeling

Shear and Bending Performance of Carbon Fiber Composite Sandwich Panels with Pyramidal Truss Cores

Study on the Static and Dynamic Performance of Concave Triangular Honeycomb Sandwich Panels

Damage sensitivity studies of composite honeycomb sandwich structures under in-plane compression and 4-point bending: experiments and numerical simulations

Bending Response of Carbon Fiber Composite Sandwich Beams with Three Dimensional Honeycomb Cores

Mechanical Properties and Damage Failure of Carbon Fiber Reinforced Polymer Composite Sandwich Structure with Square Honeycomb Core Using the Interlocking Method

Experimental and Theoretical Study of Sandwich Panels with Steel Facesheets and Gfrp Core

Three-point Bending of Physically Asymmetric Metal Sandwich Beams with Aluminum Foam Core: Failure Behavior and Optimal Design

Bending Performance of Post-Fire Lightweight Polyethylene Metal Sandwich Panels

Study on automobile body performance of honeycomb sandwich composite material