Abstract:This work examines the influence of preparation methods on the physicochemical properties and catalytic performance of MnOx-CeO2 catalysts for selective catalytic reduction of NO by NH3 (NH3-SCR) at low temperature. Five different methods, namely, mechanical mixing, impregnation, hydrothermal treatment, co-precipitation, and a sol-gel technique, were used to synthesize MnOx-CeO2 catalysts. The catalysts were characterized in detail, and an NH3-SCR model reaction was chosen to evaluate the catalytic performance. The results showed that the preparation methods affected the catalytic performance in the order: hydrothermal treatment > sol-gel > co-precipitation > impregnation > mechanical mixing. This order correlated with the surface Ce3+ and Mn4+ content, oxygen vacancies and surface adsorbed oxygen species concentration, and the amount of acidic sites and acidic strength. This trend is related to redox interactions between MnOx and CeO2. The catalyst formed by a hydrothermal treatment exhibited excellent physicochemical properties, optimal catalytic performance, and good H2O resistance in NH3-SCR reaction. This was attributed to incorporation of Mnn+ into the CeO2 lattice to form a uniform ceria-based solid solution (containing Mn-O-Ce structures). Strengthening of the electronic interactions between MnOx and CeO2, driven by the high-temperature and high-pressure conditions during the hydrothermal treatment also improved the catalyst characteristics. Thus, the hydrothermal treatment method is an efficient and environment-friendly route to synthesizing low-temperature denitrification (deNOx) catalysts.

Reaction Behaviors of NOx and Methanol Simultaneous Abatement over a Ceria-Based NH3–SCR Catalyst at Low-Medium Temperatures

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Temperature-Dependent Influencing Mechanism of Carbon Monoxide on the NH<sub>3</sub>-SCR Process over Ceria-Based Catalysts

In Situ DRIFTS Studies of NH3-SCR Mechanism over V2O5-CeO2/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx

Tailoring the Simultaneous Abatement of Methanol and NOx on Sb−Ce−Zr Catalysts Via Copper Modification

High Resistance of SO2 and H2O over Monolithic Mn-Fe-Ce-Al-O Catalyst for Low Temperature NH3-SCR

SO 2-and H 2 O-tolerant Catalytic Reduction of NO X at Low Temperatures Through Shielding Ceria-Based Catalyst from Poisoning: an Efficient Protection Mechanism

Catalytic performance of CeO2-NPs and α-MnO2 mixed oxides catalysts for low-temperature NH3-SCR of NO

Influence of Preparation Methods on the Physicochemical Properties and Catalytic Performance of MnOx-CeO2 Catalysts for NH3-SCR at Low Temperature

Synergistic Removal of NOx and VOCs from Flue Gas on Mn-Based Catalysts

Interactions between CO oxidation and selective catalytic reduction of NO with NH3 over Mn-based catalysts

Interaction Mechanism for Simultaneous Elimination of Nitrogen Oxides and Toluene over the Bifunctional CeO2-TiO2 Mixed Oxide Catalyst

Performance of Low-temperature SCR of NO with NH3 over MnOx/Ti-based catalysts

Synergistic Effect Between Ceria and Tungsten Oxide on WO3–CeO2–TiO2 Catalysts for NH3-SCR Reaction

Low-temperature SCR of NO with NH3 over AC/C Supported Manganese-Based Monolithic Catalysts

CeO2 Nanoparticle-Loaded MnO2 Nanoflowers for Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Mn-Ce Oxide Nanoparticles Supported on Nitrogen-Doped Graphene for Low-Temperature Catalytic Reduction of NOx: De-Nitration Characteristics and Kinetics

Effect of SO2 on Activated Carbon Honeycomb Supported CeO2–MnOx Catalyst for NO Removal at Low Temperature

Simultaneous abatement of NO x and CO using tandem catalyst system via reactant- and energy- Co-promoting effect

Engineering CeZrOx-Cu/SSZ-13 coupled catalysts to synergistically enhance the low-temperature NH3-SCR activity

Optimization of catalytic activity of MnCoOx catalyst for NH3–SCR at low temperature by response surface method