Abstract:Composite cylinder structures are widely used in various engineering fields. Monitoring the health state is an essential method for ensuring the safe operation of the structures. Embedded distributed fiber optic sensors have gained significant interest as they effectively address issues related to aesthetics and protection. This paper presents a strain monitoring method that involves embedding optical fibers along a spiral path within composite cylindrical structures. Additionally, a monitoring method is proposed to evaluate the structure's health state using the strain data collected in this manner. To validate the measurement accuracy of the fiber optic sensors, a comparison is made between the measurements obtained from the embedded fiber optic sensors and surface-bonded strain gauges under different working conditions. The results demonstrate excellent consistency, establishing the reliability of the fiber optic sensors. In this study, a distributed fiber optic sensor network and embedding scheme are designed for large composite cylinder structures, and strain monitoring experiments at various conditions, including pressure, bending, and hoisting loads, are conducted. Finite element simulations are alsoperformed at corresponding working conditions, and the effectiveness of fiber optic sensor measurement isconfirmed by comparing normalized simulation results with measured results. The embedded distributed fiber optic sensors effectively capture the strain changes at the reinforcement frame located in the middle of the cylinder structure, which aligns with the theoretical analysis of the cylinder structure under varying loads. This study on the embedding of fiber optics in large composite cylinder structures provides valuable insights for structural health monitoring purposes.

A Twisting Monitoring Method For Composite Fiber Tow

Influences of Wrinkles Induced by Tows’ Offset in Automated Fiber Placement on the Bending Properties of Composites

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

An Online Detection Method for Composite Fibre Tow Placement Accuracy

Large-scale deformation and damage detection of 3D printed continuous carbon fiber reinforced polymer-matrix composite structures

Real-time self-monitoring and smart bend recognizing of fiber-reinforced polymer composites enabled by embedded magnetic fibers

Study on the Fixation Technique of Optical Fiber Based on BOTDR

Real-time in-situ process monitoring method based on the self-conductivity of carbon fiber prepreg for automated fiber placement (AFP)

Automatic Weaving Method for Three-Dimensional Composite Preforms Using Vision System

Various static loading condition monitoring of carbon fiber composite cylinder with integrated optical fiber sensors

Study on stiffness distribution and failure mechanisms of the twisted profiled textile composite structure under cantilever load

Study of optical fiber smart composites fabricated by automatic fiber placement

Formation Mechanism and Modeling Method of Wrinkling Defects in Variable Angle Tow Steering Fiber Placement

Wrinkles in Fiber-Reinforced Resin Composites: Micro-stress Non-Destructive Testing

Different Testing Methods for Assessing the Synthetic Fiber Distribution in Cement-Based Composites

Composite Bridge Girders Structure Health Monitoring Based on the Distributed Fiber Sensing Textile

Hybrid Temperature and Stress Monitoring of Woven Fabric Thermoplastic Composite Using Fiber Bragg Grating Based Sensing Technique

Rapid Cut State Detection for Carbon Fiber Composite Tow

Monitoring of the Resin Transfer Molding Process Using Fiber Bragg Gratings Sensors

Fiber Optic Sensing Textile for Strain Monitoring in Composite Substrates

Experimental Study of Monitoring and Controlling of Composite Cure Process in Autoclave Featured with Fiber Optic Sensor