Modulated Beam Deflection by Liquid Crystal Optical Wedge Arrays
Cao Fan,Xu Luhan,Liu Zhiqiang,Ye Mao
DOI: https://doi.org/10.3788/aos240720
2024-01-01
Acta Optica Sinica
Abstract:Objective Traditional beam deflection systems usually employ prisms to control the beam directions,but the prisms are fixed to the beam deflection direction.To this end,the researchers adopt multiple prisms to rotate to achieve different beam deflection directions,which requires the utilization of stepper motors to control the device movement,but the system is bulky and complicated to control.After discovering the property that liquid crystal materials can electrically modulate the refractive index,increasingly more liquid crystal materials are leveraged to make optical devices whose optical properties can be electrically modulated,including liquid crystal displays,liquid crystal lenses,and liquid crystal light wedges.Liquid crystal optical wedge devices can deflect a light beam in any direction by applying a specific combination of voltages to form a linear voltage distribution in the device workspace.However,optical devices can only realize a specific function,and there is an urgent need to develop multifunctional components that can simultaneously achieve a variety of optical operations to improve the device versatility and integration.We design a new optical wedge array structure,and each unit in the array can independently control the wavefront of the outgoing light to realize free wavefront transformation.Meanwhile,feasibility is provided for subsequent integration of large-area realization of the electronically controlled modulation of the outgoing beam to form a free wavefront. Methods The proposed array device combines the design of the electrode structure and the linear response range of the liquid crystal material to improve the device versatility and integration.By employing the designed electrode structure,different tilted linear phase distributions can be achieved in the four regions when the drive voltage is controlled in the linear response range.To measure the linear response range of the LC material,we fabricate a liquid crystal cell with one planar electrode on the inner faces of two glass substrates.Additionally,one planar electrode is grounded and a voltage is applied to the other planar electrode.The voltage is increased and the normalized intensity captured by the complementary metal oxide semiconductor camera is recorded.The phase is then extracted from the recorded normalized intensity to obtain a linear response range.The prepared liquid crystal optical wedge array device is adopted to obtain the interference fringes using polarization interferometry,with the deflection direction of the beam calculated based on the extracted phase information.Finally,the Zernike polynomial is employed to fit the wavefront of the incident light to verify the feasibility of the device to modulate the beam deflection alone. Results and Discussions The liquid crystal phase change versus applied voltage is shown in Fig.5,which indicates that the phase of the liquid crystal layer is proportional to the applied voltage in the range of 0.7-1.2 V.The fixed maximum and minimum operating voltages V'max and V'min are 1.2 and 0.7 V respectively,and the direction of the interference fringes changes with the beam deflection angle,as shown in Fig.7(b).By fixing the maximum working voltage V'max as 1.2 V and gradually increasing the minimum working voltageV'min,the beam deflection angle becomes smaller and the number of interference fringes is less,as shown in Fig.7(c).After adopting Zernike polynomials to reconstruct the wavefront for the beam deflection shown in Fig.7(b),the contour of the reconstructed wavefront is projected to the xOy plane,and the angle between the contour and the x-axis is the angle of the liquid crystal optical wedge device's deflection direction angle of the beam,as shown in Fig.10,which shows that the actual angle of the deflection direction is consistent with the theory.The experimental results show that the prepared device can realize individual deflection direction control of the beams in different regions of the array. Conclusions A liquid crystal optical wedge array device is fabricated by etching the designed electrode structure on a glass substrate and combining it with photolithography to illustrate the structure,beam deflection principle,and optical properties of the device.Additionally,we obtain the linear interval of the phase-delayed response of the device by testing and further verify it by subsequently collecting interferograms.By applying different voltage combinations to different regions,the deflection angle and deflection direction angle of the outgoing beam in different regions of the array are controlled individually,and the wavefront reconstruction of the outgoing light is carried out by adopting Zernike polynomials.The results show that the device can realize different beam deflections of the four regions simultaneously,and the actual beam deflection direction is in line with the theory.The fabricated liquid crystal optical wedge device features simple driving method,small system volume,and light weight,which is expected to further expand the applications in optical tweezers and laser radars.Finally,the feasibility can be provided for subsequent integration of large-area realization of electronically controlled modulation of the outgoing beams to form a free wavefront.