Abstract:Hirth couplings are frequently used in the aero-engines turbine. The assembled stiffness of the Hirth couplings is significance to the design of the rotor system as it is outstandingly different from the continuous rotor structure. The decreasing of the axial pressing force to the rotor system of fifth-generation aero-engines can dramatically weaken the assembled stiffness of the Hirth coupling, which affect the rotor dynamics and even result in the rubbing faults. This paper focuses on the theoretical study on the rubbing characteristics of the noncontinuous rotor blade casing system caused by the stiffness weakening of the Hirth couplings. A novel analytical model of the Central Tie Rod Rotor-blade-Casing (CTRRBC) coupling system considering the Hirth couplings is derived through the Timoshenko theory and Hamilton variational principle. Then the no rubbing condition, the single-blade rubbing condition and four-blade rubbing condition of the non-continuous rotor system are calculated by using the Newmark-β method. The study results obtained by applying the analytical model are shown that (1) a decrease the assembled stiffness of the Hirth couplings lead to the significant amplitude amplification phenomenon of the rotor, blade and casing. (2) four-blade rubbing levels are related to the non-continuous rotor whirl, the rubbing happens on the blade located at the right end of the rotor whirl, nearest the casing, becomes more severe, vice versa. (3) Increasing the axial pressing force reaches the 60 kN, the rubbing responses of the non-continuous rotor blade system are similar to continuous structure (integral rotor). These results reveal the nonlinear rubbing faults characteristics of the central tie rod rotor blade casing coupling system with the Hirth couplings connection. Nonlinear effects are highlight and the multi-frequency components of system are contributed to diagnose the rubbing faults of noncontinuous rotating machinery.

Dynamic Characteristics of Rotor System with Additional Constraint Due to Rub-Impact

Constraint Mechanical Model and Investigation for Rub-Impact in Aero-Engine System

Investigation On The Modal Characteristics Of The Rubbing Rotor System With Additional Constraint

Modal Characteristics Analysis for a Flexible Rotor with Non-Smooth Constraint Due to Intermittent Rub-Impact

Dynamic Characteristics Analysis of a Rod Fastening Rotor System Considering Contact Roughness

Dynamic Characteristics and Experimental Research of a Two-Span Rotor-Bearing System with Rub-Impact Fault

Rub-impact dynamic analysis of a dual-rotor system with bolted joint structure: Theoretical and experimental investigations

Dynamic Characteristics and Experimental Research of Dual-Rotor System with Rub-Impact Fault

Nonlinear dynamic of the rod-fastening combined rotor system with rub-impact based on the Stribeck friction model

Rub-impact Dynamic Analysis of the Central Tie Rod Rotor-Blade-casing Coupling System with the Hirth Couplings Connection

Influence of Friction Coefficient on Vibration Characteristic of Rub- Impact Rotor with Axial Thrust

Nonlinear Dynamic Analysis of Rub-Impact Rod-Fastening Combined Rotor Systems with Internal Damping

Nonlinear Dynamics of Rub-Impact on a Rotor-Rubber Bearing System with the Stribeck Friction Model

Rub-Impact Investigation of a Single-Rotor System Considering Coating Effect and Coating Hardness

Transient State Analysis of a Rub-Impact Rotor System During Maneuvering Flight

Dynamic Characteristics of Rotor System and Rub-Impact Fault Feature Research Based on Casing Acceleration

Dynamic Characteristics of Rub-Impact on Rotor System with Cylindrical Shell

Dynamics Analysis of an Impact-Rub Rotor by Finite Element Method

Stiffening effect of the rotor during the rotor-to-stator rub in a rotating machine

Dynamic Characteristics of a Disk–drum–shaft Rotor System with Rub-Impact

The Influence Of Damping Coefficient On Vibration Characteristic Of A Rub-Impact Rotor Under Axial Thrust