Abstract:In order to improve the beta-lamellae distribution and properties of beta-isotactic polypropylene (beta-iPP) membranes, amounts of 5 and 10% active nano-CaCO3 were added into beta-iPP. Differential scanning calorimetry, X-ray diffraction and scanning electron microscopy results show that nano-CaCO3 does not reduce the content of beta-crystals, but the thickness, lamellae thickness distribution and stability of beta-lamellae decrease apparently. Tensile testing was conducted at 25 and 90 degrees C. The results manifest that the second yield point, which has a strong negative correlation with lamellae thickness distribution, is delayed monotonically with addition of nano-CaCO3 when stretched at 25 degrees C, indicating that nano-CaCO3 could narrow effectively the lamellae thickness distribution of beta-iPP. Furthermore, when stretched at 90 degrees C, the subdued yield peak, retarded necking-down phenomenon and enhanced strain-hardening modulus demonstrate that the deformation stability improves gradually with introduction of nano-CaCO3, which is completely opposite to the trend for beta-lamellae stability. Through further detailed characterization of morphological evolutions during stretching, we found that interfacial debonding between nano-CaCO3 and beta-iPP is triggered and abundant microviods can be formed, which can retard the rotation and slip of beta-lamellae and make the beta-alpha transformation slow down in the initial stage of stretching, consequently leading to better isotropic deformation. Moreover, nano-CaCO3 could efficiently restrain the formation of coarse fibrils, leading to more uniform pore size distribution within the biaxial stretching microporous membrane. However, excessive nano-CaCO3 (10%) would cause aggregation within the beta-iPP cast film and finally result in larger pores and poor pore distribution in the membrane. (C) 2017 Society of Chemical Industry

Formation of Oriented Β‐transcrystals Induced by Self‐assembly of Nucleating Agent and Its Micropores Formation During Uniaxial Stretching

Preparation of Highly Oriented Β Polypropylene and Its Pore Formation Mechanism During Stretching

Oriented Polypropylene Cast Films Consisted of Β-Transcrystals Induced by the Nucleating Agent Self-Assembly and Its Homogeneous Membranes with High Porosity

Deformation and Pore Formation Mechanism of Β Nucleated Polypropylene with Different Supermolecular Structures

Pore formation mechanism of beta nucleated polypropylene stretched membranes

Supramolecular Self‐assembly of Compound Β Nucleating Agent and Effect on Polypropylene Microporous Membrane

Pore Formation Mechanism of Oriented Β Polypropylene Cast Films During Stretching and Optimization of Stretching Methods: In-situ SAXS and WAXD Studies

Effect of the Content of Β Form Crystals on Biaxially Stretched Polypropylene Microporous Membranes and the Tuning of Pore Structures

Micropore Formation and Crystalline Evolution During Biaxial Stretching Process of Ipp Film Constructed of Ordered and Continuous Β-Transcrystallinity

Shear-Induced Precursor Relaxation-Dependent Growth Dynamics and Lamellar Orientation of Β-Crystals in Β-Nucleated Isotactic Polypropylene

Influence of lamellar structure on double yield behavior and pore size distribution in β nucleated polypropylene stretched membranes

Investigation Of Deformation And Pore Formation In Isotactic Polypropylene Containing Active Nano-Caco3

Influence Of Oriented Beta-Lamellae On Deformation And Pore Formation In Beta-Nucleated Polypropylene

Effect of Annealing on the Microvoid Formation and Evolution During Biaxial Stretching of Β Nucleated Isotactic Polypropylene

Deformation Behavior of Isotactic Polypropylene with Oriented Α- and Β-Crystals

Preparation, Structure, and Properties of an Isotactic Polypropylene Film with Ultrahigh Content, Ordered, and Continuous Β-Transcrystallinity

Toward Uniform Pore-Size Distribution and High Porosity of Isotactic Polypropylene Microporous Membrane by Adding A Small Amount of Ultrafine Full-Vulcanized Powder Rubber

Beta/Alpha Transformation Of Beta-Polypropylene During Tensile Deformation: Effect Of Crystalline Morphology

Formation Mechanism and Morphology of Β-Transcrystallinity of Polypropylene Induced by Two-Dimensional Layered Interface

Influence of nucleating agent self-assembly on structural evolution of isotactic polypropylene during uniaxial stretching

Structural Evolution and Toughening Mechanism of Β-Transcrystallinity of Polypropylene Induced by the Two-Dimensional Layered Interface During Uniaxial Stretching