Abstract:Because of nonlinearities, uncertainties and inherent performance limitations of the mechatronic system, there is a trade-off between tracking error minimization and robust stabilization. This implies that the tracking error is unavoidable in practice. Fortunately, in the path following motion control system, it is the geometric error that measures the quality of the product. Since the tracking error gives an upper bound on the geometric error, by the principle of uncertainty, more preference can be given to the geometric error dynamics to improve the quality of the product. For generic parametric tool path, although the geometric error is hard to be computed numerically, it can be estimated by a projection operator on the tracking error vector. Then the tasks of contouring error compensation are twofold: to internally stabilize the feedback system, and to minimize the estimated contouring error. A novel multiple-loop structure is proposed in this paper. By using this structure, the internal stability of the feedback system is guaranteed, if the norm of the compensator is less than a function value on the infinity norm of the tracking error dynamics. Experiments were done on milling machines to verify the feasibility of the proposed structure. Low order compensators were designed and compared with each other. In the experiments, the estimated contouring error was reduced by more than 20%, while the tracking error did not change too much.

A Semi Closed Loop Compensation Method for Trajectory Error of Continuum Robot Based on Vector Method

Kinematics and Fuzzy Control of Continuum Robot Based on Semi-closed Loop System

Positioning Error Compensation on Two-Dimensional Manifold for Robotic Machining

Research on Error Compensation of Multi-joint Ultrasonic Robot Based on Ontology

Model-based Trajectory Tracking Control for an Electrohydraulic Lifting System with Valve Compensation Strategy

Position Error Compensation of Semi-Closed Loop Servo System Using Support Vector Regression and Fuzzy PID Control

Advanced Contouring Error Compensation in High Performance Motion Control Systems

Continuum Robots: A Real-Time Model-Based Data-Driven Nonlinear Controller

Online Iterative Learning Compensation Method Based on Model Prediction for Trajectory Tracking Control Systems

Variable-gain control for continuum robots based on velocity sensitivity

A Closed-Loop Error Compensation Method for Robotic Flank Milling

Error Compensation Method of Industrial Robots Considering Non-Kinematic and Weak Rigid Base Errors

A Robot Positional Error Compensation Method Based on Improved Kriging Interpolation and Kronecker Products

Positional Accuracy Improvement of an Industrial Robot Using Feedforward Compensation and Feedback Control

Adaptive Trajectory Compensation of Large Inertia Robot

Accuracy Compensation Technology of Closed?Loop Feedback of Industrial Robot Joints

A Hybrid Model for Pre-Compensating Servo Error in the Ball Screw System Based on High-Bandwidth Controller

Online Koopman Operator-Based Feedforward Compensation Strategy for Fast Tool Servos with Robust High-Bandwidth Control

Improved Trajectory Tracking Control for a Continuum Robot Using Error-Driven ADRC With Input Mapping Method

A Gap Nonlinearity Compensation Strategy for Non-Direct-Drive Servo Systems

An Analytical Differential Kinematics-Based Method for Controlling Tendon-Driven Continuum Robots