Abstract:Abstract Aerostatic bearing is an ultra-precision component that uses a spindle surrounded by a thin film of air. Due to the high accuracy of aerostatic bearing, the demand for these components is very high in electronic, instrumentation, healthcare, and other manufacturing or processing industries. In the present work, the main focused area is on the experimental determination of the effect of roughness parameter on the performance of the aerostatic journal and thrust bearings. To achieve the aim, the aerostatic bearing is designed based on theoretical analysis. The present design is numerically investigated by simulation of airflow in ANSYS Fluent with computational fluid dynamics module. The results from the simulation are validated by the results generated for pressure distribution in previous researches. After performing the finishing on the bearing and spindle surface, the manufactured components are assembled for analysing the variation in radial and axial loads acting on the spindle with the spindle displacement (1-5 μm) in the direction of the load at supply pressures (3-6 bar) in the clearance of 30 μm. For surface improvement of the air bearing, three different techniques are used namely machining, grinding, and magnetorheological finishing. For each roughness reduction technique, the variation in axial and radial loads acting on the spindle is determined with variation in spindle displacement. The experimental results showed the increase in load capacity due to improvement in the surface finish for journal bearing and thrust bearing at 5 μm displacement in the spindle is found to be 0.68 N for machining to grinding and 2.0 N from grinding to magnetorheological finishing respectively. The results determined for the surface finish parameter reveals the effect of surface roughness on the load-carrying capacity of the aerostatic journal and thrust bearing. The current study on the surface finishing of aerostatic bearing is found effective for the applications such as drives in production machines where good grade of surface finish are the major parameters for improving the overall functional efficiency.

The Influence of Groove Types on Air Bearing Properties

Research on the Influence of Different Surface Machining States on the Inclination of the Porous Gas Bearing

Optimization Of No-Whirl-Wind Self-Acting Gas Bearing Groove Shape

Optimization And Simulation Of Self-Acting Gas Bearing Rectangular Groove Section

Modelling and performance improvement of an annular grooved thrust air bearing

Influence of surface texture on pocket pairs lubrication performance of cylindrical roller bearings

Optimal Design of Surface Texture in Parallel Thrust Bearings

An Experimental Investigation of Groove Control for Reducing Drag in a Flat Turbulent Boundary Layer

Numerical analysis of lubrication properties on a bio-inspired parabolic textured surface

Influence of Surface Texture on the Stability of Spindle Supported by Sliding Bearing

Influences of Pressure-equalizing Groove on the Load Capacity of Externally Pressurized Gas Journal Bearings

Studying on the characteristics of axial-grooved gas-lubricated cylindrical bearing

Design of groove structures for bearing lubrication enhancement based on the flow mechanism analysis

Performance of Heavily Loaded Textured Gas Foil Bearings Based on the Multigrid Method

Finite Volume Modeling of Gas Flow in Microbearings with Rough Surface Topography

Effects of Texture Slip Surface on Load-Carrying Capacity and Cavitation of Bearing

Numerical Optimization of the Groove Texture Bottom Profile for Thrust Bearings

Investigating The Effect of Surface Finishing On Performance of Designed Aerostatic Bearing For Its Improved Precision Applications

Research on the Reciprocating Load Characteristics of a Hydrodynamic Bearing Surface with Sloped Grooves

Research on Internal Flow Field Characteristics of Straight-Groove Texture Using Three-Dimensional Modeling

Effects of Random Surface Roughness on Micro Gas Bearing