Abstract:This paper is the first part of a three paper series studying the overall performance of a micro pin-fin heat sink with single phase liquid flow and different pin-fin geometries operating under and similar conditions. Two different heat sinks, one with square shaped pin-fins and the other with circular pin-fins are selected for study in this paper. The paper focuses on studying the effect of thermal resistance and pressure drop of micro heat sinks when subjected to various factors such as pitch distance in axial and transverse directions, aspect ratio of the pin-fin, hydraulic diameters of the pin-fin, and the liquid flow rate through the device. A figure of merit (FOM) involving both the thermal resistance and pressure drop across the heat sink is introduced in the paper and the performance is evaluated on the basis of this FOM. The heat sinks are subjected to uniform heat flux at the bottom of the heat sink and the characteristic study is based on constant Reynolds number of liquid flow at the entrance of the channel. Water is used as the fluid in this study. The study is conducted over the Reynolds number range of 50–500. The characteristic study is carried out with the help of simulations developed using commercially available computational fluid dynamics software CoventorWare™. The characteristic study carried out in this paper is divided into four cases. In the first case the axial pitch distance is varied between 350 μm and 650 μm by keeping the aspect ratio of the pin-fin structure constant at 0.5. For the second case the transverse pitch distance is varied between 150 μm and 300 μm and the aspect ratio is kept the same as in the first case. Third case studies the effect of varying the aspect ratio (between 0.33 and 1) of the pin-fin structures by keeping both pitches constant. Case four studies the variation in the performance of the heat sink with the change in the hydraulic diameter of the pin-fins. The study conducted in this paper reveals the importance of considering the pressure drop along with the thermal resistance in evaluating the overall performance of the micro pin-fin heat sink. At low Reynolds number (below 300) the heat sinks with circular pin-fins shows better performance compared with heat sinks with square pin-fins and vice versa at high Reynolds number (above 300). FOM varies considerably with the change in the parameters like axial pitch distance, transverse pitch distance, aspect ratio and hydraulic diameter of the pin-fins.

Thermal-hydraulic Investigation on Micro Heat Sinks with Ribbed Pin-Fin Arrays and Single Heating Input: Parametrical Study

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Fluid Flow and Heat Transfer Performance in a Micro-Reactor with Non-Uniform Micro-Pin-fin Arrays for Hydrogen Production at Low Reynolds Number

An Experimental Study of Microchannel and Micro-Pin-Fin Based On-Chip Cooling Systems with Silicon-to-Silicon Direct Bonding.

Numerical study on hydrothermal performance in a microchannel with gradient array of ribs and pin fins

Numerical investigation on thermal-hydraulic characteristics of the micro heat sink with gradient distribution pin fin arrays and narrow slots

Parametric study on the combined thermal and hydraulic performance of single phase micro pin-fin heat sinks part I: Square and circle geometries

Numerical simulation study of thermal and hydraulic characteristics of laminar flow in microchannel heat sink with water droplet cavities and different rib columns

Experimental investigation of the thermal-hydraulic characteristics of liquid cooling heat sinks with novel pin fins

Thermal-hydraulic performance enhancement of modified hexagonal micro-Pin fin heat sinks using rotational configurations

Numerical Investigations of the Thermal-Hydraulic Characteristics of Microchannel Heat Sinks Inspired by Leaf Veins

Thermal–Hydraulic Performance Analysis of Combined Heat Sink with Open Microchannels and Embedded Pin Fins

Numerical analysis on thermal-hydraulic performance of optimized microchannel heat sink with slant ribs and quatrefoil rib-elliptical groove complex structures

Numerical study on flow and heat transfer in a novel symmetric sinusoidal wavy microchannel heat sink with rectangular rib prisms

Thermal performance enhancement of a micro-jet heat sink via parametric investigated micro pin fin arrays

Study on the efficient heat transfer mechanism of microchannel pin-fin arrays under low pumping power

Numerical study and optimization of thermal efficiency for a pin fin heatsink with nanofluid flow by modifying heatsink geometry

Convective heat transfer of microchannel heat sinks with pinfins and jets for a heat flux up to 500 W/cm 2

Optimization of elliptical pin-fin microchannel heat sink based on artificial neural network

Influence of fin length and width on flow and heat transfer performance of miniature heat sinks

Numerical Investigations of Heat Transfer and Fluid Flow Characteristics in Microchannels with Bionic Fish-Shaped Ribs