Abstract:Tungsten-doped strontium ferrite (SrFe1-xWxO3-δ, SFW) is prepared and characterized as the electrode materials for symmetrical solid oxide electrochemical cell. X-ray diffraction refinement reveals the symmetrical structure transform from cubic <math>(pm3¯m)</math> for x = 0.1 to tetragonal (I4/m) when x = 0.2. According to the analysis including electrical conductivity, Hydrogen temperature-programmed reduction (H2-TPR), thermal expansion and X-ray photoelectron spectra (XPS), it suggests that the decrease in conductivity, content of Fe2+ and oxygen vacancy concentration with the increase of W content is attributed to the stronger lattice framework. The oxygen vacancy can be dramatically activated around 600 °C. Using SrFe0.8W0.2O3-δ as the electrodes, symmetrical single cells supported on doped ceria electrolytes can achieve acceptable power density (0.19 W cm−2 at 750 °C) and considerable stability. Meanwhile symmetrical cells with La0.9Sr0.1Ga0.8Mg0.2O3-δ (LSGM) electrolyte substrates can achieve 0.75 A cm−2 at 800 °C under the voltage of OCV (open circuit voltage) +0.5 V when it is operated in electrolysis mode. SrFe0.8W0.2O3-δ can gain a considerable stability and electrochemical activity under both oxide and reductive atmospheres. Oxygen vacancy formation energy (Evac) and electron density distribution are computed to verify the enhancement on crystal structure stability by doping W. The Evac critically depends on the distance from the W atom.

Tungsten-Doped PrBaFe2O5+δ Double Perovskite As a High-Performance Electrode Material for Symmetrical Solid Oxide Fuel Cells

Ta-doped PrBaFe2O5+δ double perovskite as a high-performance electrode material for symmetrical solid oxide fuel cells

Efficient symmetrical electrodes of PrBaFe2-Co O5+δ (x=0, 0.2,0.4) for solid oxide fuel cells and solid oxide electrolysis cells

Tuning Pr0.5Ba0·5FeO3-δ cathode to enhanced stability and activity via Ca-doping for symmetrical solid oxide fuel cells

Co-free and Sr-free Double-Perovskite Oxide PrBaFe1.9Nb0.1O5+δ As a Potential Electrode Material for Symmetrical Solid Oxide Fuel Cells

RuOx modified PrBaFe1.8Hf0.2O5+δ surface for boosting the performance of symmetrical solid oxide fuel cells

High performance and stability of PrBa0.5Sr0.5Fe2O5+δ symmetrical electrode for intermediate temperature solid oxide fuel cells

Further Optimization of the Properties of Pr0.6Sr0.4Fe0.9W0.1O3-δ by Cu-doping As Symmetric Electrodes for Solid Oxide Fuel Cells

Characterization of Pr0.5A0.5Fe0.9W0.1O3-δ (A = Ca, Sr and Ba) as Symmetric Electrodes for Solid Oxide Fuel Cells

Enhanced Electrocatalytic Activity and Stability for Symmetrical Solid Oxide Fuel Cells with Praseodymium-Doped SrCo0.2Fe0.8O3-δ Electrodes

A highly stable of tungsten doped Pr0.6Sr0.4Fe0.9W0.1O3-δ electrode for symmetric solid oxide fuel cells

Characterization of Pr(0.5)A(0.5)Fe(0.9)W(0.1)O(3-delta) (A = Ca, Sr and Ba) as symmetric electrodes for solid oxide fuel cells

High-performing Proton-Conducting Solid Oxide Fuel Cells with Triple-Conducting Cathode of Pr0.5Ba0.5(Co0.7Fe0.3)O3-δ Tailored with W

High performance SmBaMn2O5+δ electrode for symmetrical solid oxide fuel cell

Electrochemical Evaluation of Double Perovskite PrBaCo2-xMnxO5+δ (x = 0, 0.5, 1) As Promising Cathodes for IT-SOFCs

High-Performance Sr0.95Fe0.8Mo0.1Ni0.1O3−δ Electrode for Reversible Symmetrical Solid Oxide Cells

Calcium-doped double perovskite PrBaFe2O5+δ as a high-performance cathode for solid oxide fuel cells

Exceptionally High Performance Anode Material Based on Lattice Structure Decorated Double Perovskite Sr2FeMo2/3Mg1/3O6-delta for Solid Oxide Fuel Cells

Cobalt-Free Double Perovskite Oxide As a Promising Cathode for Solid Oxide Fuel Cells.

Cobalt-free Ba0.5Sr0.5Fe0.8Cu0.1Ti0.1O3−δ As a Bi-Functional Electrode Material for Solid Oxide Fuel Cells

Effect of tungsten doping on strontium ferrite electrode for symmetrical solid oxide electrochemical cell