Abstract:Background: Upper-limb rehabilitation robots have become an important piece of equipment in stroke rehabilitation. The design of exoskeleton mechanisms plays a key role to improve human-robot interface in the upper-limb movements under passive and active rehabilitation training. Objective: This paper proposes a novel of the 7-DOF (RR-RR-PRR) under-actuated exoskeleton mechanism based on the characteristics of the upper-limb movements in both of active and passive training. This aim of the proposed work is to improve human-robot interface in rehabilitation training with robots. Methods: Firstly, the characteristics of active and passive movement training are analyzed depending on the human upper-limb model. Then, a novel 7-DOF (RR-RR-PRR) exoskeleton mechanism is proposed based on the analyzed characteristics. After that, kinematical performances of the proposed exoskeleton are analyzed on the workspace, manipulability and manipulability ellipsoid by compared with the common exoskeleton configuration of the 7 DOFs (RRR-R-PRR) mechanism. In the end, the prototype is manufactured and tested by undergoing the experiments of single-joint passive movement training and multi-joint active movement training. The human-robot interface of the proposed exoskeleton is demonstrated by root mean square error, Pearson correlation coefficient, and the time-delay difference. Results: The results of the kinematical performance show that the effective workspace and the flexibility of the exoskeleton with the proposed configuration are increased by 10.44% and 1.7%. In the single-joint passive movement training experiment, the root mean square errors are 6.986, 7.568, 5.846, and Pearson correlation coefficients are 0.989, 0.984, 0.988 at the shoulder joint and the elbow joint, respectively. The time-delay differences are not beyond 3.1%. In the multi-joint active movement training experiment, the root mean square errors are 9.312 and 7.677, and Pearson correlation coefficients are 0.906 and 0.968 at the shoulder joint and the elbow joint, respectively. The time-delay differences are not beyond 3.28%. Conclusions: The proposed 7 DOFs exoskeleton mechanism shows uniformity with that of the common exoskeleton on the same rehabilitation trajectory which is effective to improve human-robot interface under passive and active rehabilitation training.

Comparative Analysis of Three Categories of Four-Dofs Exoskeleton Mechanism Based on Relative Movement Offsets.

Research on the Kinematic Compatibility of Position Solution of a Four-DOFs Mechanical Structure Mechanism

Compatibility Evaluation of a 4-DOF Ergonomic Exoskeleton for Upper Limb Rehabilitation

Position Solution of a Novel Four-Dofs Self-Aligning Exoskeleton Mechanism for Upper Limb Rehabilitation

Kinematics and Dexterity Analysis of the Human-machine Compatible Exoskeleton Mechanism for Shoulder Joint Rehabilitation

Design and kinematical performance analysis of the 7-DOF upper-limb exoskeleton toward improving human-robot interface in active and passive movement training

Design and Kinematic Analysis of Co-Exoskeleton with Passive Translational Joints for Upper-Limb Rehabilitation

Improvement of Human–machine Compatibility of Upper-Limb Rehabilitation Exoskeleton Using Passive Joints

Configuration Design and Analysis of the Human-Machine Kinematically Compatible Type Exoskeleton Mechanism for Lower Limb Rehabilitation Training

Design and Human–machine Compatibility Analysis of Co-Exos II for Upper-Limb Rehabilitation

An Eight-Degree-of-freedom Upper Extremity Exoskeleton Rehabilitation Robot: Design, Optimization, and Validation

Kinematics and Dynamics Analysis of a 3-DOF Upper-Limb Exoskeleton with an Internally Rotated Elbow Joint

Configuration Comparison and Design of an Upper Limb Exoskeleton for Robot Teleoperation

Design and Validation of a Compatible 3-Degrees of Freedom Shoulder Exoskeleton with an Adaptive Center of Rotation

Structure Design of Lower Limb Exoskeletons for Gait Training

Design of Lower Limb Rehabilitation Exoskeleton Mechanism Based on Passive Joint Subchains

A Number Synthesis Method of the Self-Adapting Upper-Limb Rehabilitation Exoskeletons

Design of a 6-DOF upper limb rehabilitation exoskeleton with parallel actuated joints.

Design of an Exoskeleton for Index Finger Rehabilitation

A Human-centered Kinematics Design Optimization of Upper Limb Rehabilitation Exoskeleton Based on Configuration Manifold

A Novel 10-DoF Exoskeleton Rehabilitation Robot Based on the Postural Synergies of Upper Extremity Movements.