Abstract:Background: Upper-limb rehabilitation robots have become an important piece of equipment in stroke rehabilitation. The design of exoskeleton mechanisms plays a key role to improve human-robot interface in the upper-limb movements under passive and active rehabilitation training. Objective: This paper proposes a novel of the 7-DOF (RR-RR-PRR) under-actuated exoskeleton mechanism based on the characteristics of the upper-limb movements in both of active and passive training. This aim of the proposed work is to improve human-robot interface in rehabilitation training with robots. Methods: Firstly, the characteristics of active and passive movement training are analyzed depending on the human upper-limb model. Then, a novel 7-DOF (RR-RR-PRR) exoskeleton mechanism is proposed based on the analyzed characteristics. After that, kinematical performances of the proposed exoskeleton are analyzed on the workspace, manipulability and manipulability ellipsoid by compared with the common exoskeleton configuration of the 7 DOFs (RRR-R-PRR) mechanism. In the end, the prototype is manufactured and tested by undergoing the experiments of single-joint passive movement training and multi-joint active movement training. The human-robot interface of the proposed exoskeleton is demonstrated by root mean square error, Pearson correlation coefficient, and the time-delay difference. Results: The results of the kinematical performance show that the effective workspace and the flexibility of the exoskeleton with the proposed configuration are increased by 10.44% and 1.7%. In the single-joint passive movement training experiment, the root mean square errors are 6.986, 7.568, 5.846, and Pearson correlation coefficients are 0.989, 0.984, 0.988 at the shoulder joint and the elbow joint, respectively. The time-delay differences are not beyond 3.1%. In the multi-joint active movement training experiment, the root mean square errors are 9.312 and 7.677, and Pearson correlation coefficients are 0.906 and 0.968 at the shoulder joint and the elbow joint, respectively. The time-delay differences are not beyond 3.28%. Conclusions: The proposed 7 DOFs exoskeleton mechanism shows uniformity with that of the common exoskeleton on the same rehabilitation trajectory which is effective to improve human-robot interface under passive and active rehabilitation training.

Position Solution of a Novel Four-Dofs Self-Aligning Exoskeleton Mechanism for Upper Limb Rehabilitation

Design and Compliance Control of Rehabilitation Exoskeleton for Elbow Joint Anchylosis

A Novel Multi-Dof Exoskeleton Robot for Upper Limb Rehabilitation

An Eight-Degree-of-freedom Upper Extremity Exoskeleton Rehabilitation Robot: Design, Optimization, and Validation

Design and Control of a Reconfigurable Upper Limb Rehabilitation Exoskeleton With Soft Modular Joints

Self-reconfiguration Method of an Intelligent Multi-mode Linkage Finger Based on Quantitative Reconstruction of Center Point

Design and Optimization of Lower Limb Rehabilitation Exoskeleton with a Multiaxial Knee Joint

A novel 5-DOF exoskeletal rehabilitation robot system for upper limbs

Design and Control of a Novel Pneumatic Soft Upper Limb Exoskeleton for Rehabilitation

Development and Validation of a Self-Aligning Knee Exoskeleton With Hip Rotation Capability

Design and kinematical performance analysis of the 7-DOF upper-limb exoskeleton toward improving human-robot interface in active and passive movement training

Design and Analysis of an Upper Limb Rehabilitation Robot Based on Multimodal Control

Design of a self-aligning 3-DOF actuated exoskeleton for diagnosis and training of wrist and forearm after stroke

Design and analysis of a compatible exoskeleton rehabilitation robot system based on upper limb movement mechanism

Development and analysis of a gravity-balanced exoskeleton for active rehabilitation training of upper limb

A System for Upper Limb Rehabilitation and Motor Function Evaluation

Design and analysis of a novel 12-DOF self-balancing lower extremity exoskeleton for walking assistance

An Upper Limb Exoskeleton Motion Generation Algorithm Based on Separating Shoulder and Arm Motion

Modular Design and Implementation of Upper Limb Exoskeleton Rehabilitation Robot: Structure, Force Sensor and Control

Design of a Wearable Upper-Limb Exoskeleton for Activities Assistance of Daily Living.

A Novel Pantographic Exoskeleton Based Collocated Joint Design With Application for Early Stroke Rehabilitation