Abstract:The CFRP/Ti6Al4V composite has excellent properties of CFRP and Ti6Al4V. Therefore, they are widely used in aerospace and some military fields. The laminated structure of CFRP/Ti6Al4V composite is different from the traditional homogeneous workpiece, and the properties of each layer are diverse, so the processing performance is poor. The experimental research cost of CFRP/Ti6Al4V composites is relatively high and has certain limitations. The finite element method is a promising alternative. In the research, a finite element model combining the macro and micro with the fiber orientation of 90 degrees was established. By combining the mechanism of exit burr formation in the cutting direction of Ti6A14V and the delamination mechanism of CFRP composites, a new mechanical model was proposed for CFRP/Ti6Al4V composites during this study, and it was found that there is not a linear relationship between the rake angle and the delamination of CFRP/Ti6Al4V composites during the cutting process. The results show that the delamination damage of CFRP/Ti6Al4V composites is serious when the rake angle is 4 degrees similar to 10 degrees. The delamination damage is light when the rake angle is 0 degrees similar to 4 degrees. And the delamination damage is the smallest when the rake angle is 10 degrees similar to 20 degrees. In the cutting process, the tremor of the Ti6Al4V phase is also an important factor for delamination. During the extrusion of Ti6Al4V relative to the CFRP phase, the fragmentation of the epoxy matrix leads to brittle fracture of the carbon fibers and shear damage can occur. The brittle fracture height is minimum when the rake angle is 16 degrees. The shear damage height is minimum when the rake angle is 10 degrees. The tremor of Ti6Al4V phase is also an important factor for delamination damage. The fracture of the epoxy resin matrix leads to brittle fracture and shear damage of carbon fiber. The brittle fracture height has a linear relationship with the fracture height of epoxy resin. When the cutting sequence is CFRP -> Ti6Al4V, a better surface quality can be obtained, effectively avoiding carbon fiber brittle fracture. Therefore, the rake angle and cutting sequence are of great importance for processing CFRP/Ti6Al4V composites. Therefore, it is of reference significance for the machining of 90 degrees fiber orientation.

Improving the Delamination Resistance of CFRP by Establishing and Analyzing the Micro-Mechanical Model

Damage formation and evolution mechanisms in drilling CFRP with prefabricated delamination defects: Simulation and experimentation

Micro-damage Initiation Evaluation of Z-Pinned Laminates Based on a New Three-Dimension RVE Model

A delamination prediction model in ultrasonic vibration assisted drilling of CFRP composites

Study of drilling-induced defects for CFRP composites using new criteria

Experimental evaluation and modelling of drilling responses in CFRP/honeycomb composite sandwich panels

Analytical study of delamination damage and delamination-free drilling method of CFRP composite

Research on prediction method of mechanical properties of open-hole laminated plain woven CFRP composites considering drilling-induced delamination damage

Effects of machining conditions on the hole wall delamination in both conventional and ultrasonic-assisted CFRP drilling

Research on Reducing Drilling Damage of CFRP Pipe Based on Plastic Pipe Auxiliary Support

Influence of the Temperature-Dependent Characteristics of CFRP Mechanical Properties on the Critical Axial Force of Drilling Delamination

Defects Study on Drilling of Carbon Fiber Reinforced Polymer (CFRP) Laminates

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

Delamination in rotary ultrasonic machining of CFRP composites: finite element analysis and experimental implementation

Effects of Specialized Drill Bits on Hoe Defects of CFRP Laminates

Optimization of CFRP drilling process: a review

Carbon fiber reinforced polymer in drilling: From damage mechanisms to suppression

Delamination and Chip Breaking Mechanism of Orthogonal Cutting CFRP/Ti6Al4V Composite

Damage and Failure Mechanisms of CFRP Due to Manufacturing Induced Wrinkling Defects

Prediction of Delamination Defects in Drilling of Carbon Fiber Reinforced Polymers Using a Regression-Based Approach

Experimental Analysis on Delamination Damage by Acoustic Emission in High Speed Drilling of Carbon Fiber Reinforced Plastics