Abstract:Parameter and Waveform analysis of energy evolution. The objective of this paper is to analyze the mechanical properties and damage mechanisms of carbon fiber‐reinforced polyamide thermoplastic composite laminates. Four specimens with different ply orientations were designed for open‐hole tensile experiments, and interlaminar toughness experiments including double cantilever beam and end‐notched flexural were carried out. The experimental process was monitored synchronously using acoustic emission, and the strain field changes of the tensile specimens were captured using digital image correlation technology. The unsupervised clustering of the peak frequencies of the acoustic emission signals based on the K‐means++ algorithm was employed to ascertain the peak frequency ranges corresponding to the various damage modes. Typical signals from different specimens were selected, and the gray wolf algorithm was used to optimize the variational modal parameters to decompose the signals. The waveform characteristics, frequency components, and Hilbert spectra of each damage mode were given. The correlation analysis of the intrinsic mode function (IMF) components of the same damage in different specimens demonstrated that the IMF components exhibited high similarity. By analyzing the time series changes in the energy of each damage mode in different specimens, the contribution of different damage modes to the evolution of laminated plate damage was evaluated. Highlights The mechanical properties of CF/PA6 laminates were investigated based on open‐hole tensile specimens and pre‐cracked delamination specimens. Unsupervised clustering of AE peak frequencies using K‐means++ to establish the relationship between peak frequencies and damage patterns. AE counts and cumulative energy were used to assess damage evolution. By identifying a single damage signal and providing a more intuitive treatment of the damage energy evolution.

Experimental Analysis on Delamination Damage by Acoustic Emission in High Speed Drilling of Carbon Fiber Reinforced Plastics

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Failure characterization of PLA parts fabricated by fused deposition modeling using acoustic emission

A delamination prediction model in ultrasonic vibration assisted drilling of CFRP composites

Study on Delamination Damage of CFRP Laminates Based on Acoustic Emission and Micro Visualization

Analytical study of delamination damage and delamination-free drilling method of CFRP composite

Research on prediction method of mechanical properties of open-hole laminated plain woven CFRP composites considering drilling-induced delamination damage

A study on the ultrasonic vibration on the cutting performance during ultrasonic-assisted drilling of CFRP with twist and dagger drill bits

Investigation on damage behaviors of carbon fiber‐reinforced nylon 6 thermoplastic composite laminates using acoustic emission and digital image correlation techniques

Experimental evaluation and modelling of drilling responses in CFRP/honeycomb composite sandwich panels

Damage formation and evolution mechanisms in drilling CFRP with prefabricated delamination defects: Simulation and experimentation

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Damage Monitoring of Regularly Arrayed Short-Fiber-Reinforced Composite Laminates under Tensile Load Based on Acoustic Emission Technology

Modeling Evolution of Cutting Force in Ultrasonically Assisted Drilling of Carbon Fiber Reinforced Plastics

Surface defect and chatter monitoring in robotic drilling CFRP composites using acoustic emission technique

Characterization of the damage mechanism in CFRP composites under mode I based on comprehensive analysis of AE signals

Delamination assessment and prediction in ultrasonic-assisted drilling of laminated hybrid composites

A novel method for predicting delamination of carbon fiber reinforced plastic (CFRP) based on multi-sensor data

Effects of machining conditions on the hole wall delamination in both conventional and ultrasonic-assisted CFRP drilling

Acoustic emission-based delamination investigation in drilled GFRP under mixed tensile and bending cyclic loading