Abstract:The main design target for a casing treatment device is to increase the stall margin of a given compressor without sacrificing efficiency. In this article, numerical and experimental investigations about a new-type grooved casing treatment configuration are presented for a high-speed small-size centrifugal compressor. Different from traditional grooved casing treatments, in which the grooves are always placed over the rotor (for both axial and radial compressors), one or several circumferential casing grooves are placed along the shroud side of the diffuser passage in this configuration, to enhance the stall margin of the compressor. Computational fluid dynamics analysis is performed under stage environment in order to find the optimum location of the circumferential casing groove for the subsequent experiments in consideration of stall margin enhancement and peak efficiency gain, and the impact of groove number to the effect of this new-type grooved casing treatment configuration in enhancing the stall margin of the compressor stage is studied. It is found that stall margin gain due to the existence of circumferential casing grooves arises from the suction–reinjection effect of the low momentum fluid and its transportation along the circumferential and streamwise directions in the grooves and the grooves located at the middle and rear part of the diffuser casing wall have more pronounced effect in expanding the stall margin of the centrifugal compressor. In order to verify the effectiveness of this new-type grooved casing treatment configuration, the solid casing compressor and the compressors with circumferential casing grooves are tested in our test rig. The results indicate that this new-type grooved casing treatment configuration can obtain obvious improvement in the stall margin without sacrificing peak efficiency. Also, the numerical investigation is conducted for the entire compressor with circumferential casing grooves and the result is compared with the experimental data.

Numerical Analysis of Flow in a Centrifugal Compressor with Circumferential Grooves: Influence of Groove Location and Number on Flow Instability

NUMERICAL INVESTIGATION OF A CENTRIFUGAL COMPRESSOR WITH A SINGLE CIRCUMFERENTIAL GROOVE IN DIFFERENT TYPES OF DIFFUSERS

Numerical analysis of two circumferential groove casing treatments about a centrifugal compressor

Numerical Investigation of the Casing Treatment Mechanism with a Single Circumferential Groove

Numerical Investigation of the Circumferential Grooved Casing Treatment As Well As Analyzing the Mechanism of Improve Stall Margin

Numerical Analysis of the Circumferential Grooves Casing Treatment in a Counter-Rotating Axial Flow Compressor

Numerical Analysis of the Effects of Circumferential Groove Casing Suction in a Counter-Rotating Axial FLow Compressor

Performance Enhancement of a Transonic Axial Flow Compressor with Circumferential Casing Grooves to Improve the Stall Margin

The impact of casing groove location on the flow instability in a counter-rotating axial flow compressor

Numerical and Experimental Investigations of the Flow in a Compressor with Circumferential Grooves

Exploration of a New-Type Grooved Casing Treatment Configuration for a High-Speed Small-Size Centrifugal Compressor

An Analysis of the Circumferential Grooves Casing Treatment for Transonic Compressor Flow

Numerical Investigation of Circumferential Groove Casing Treatment in a Highly-Loaded Low-Reaction Transonic Compressor Rotor

The Impact of Casing Groove Location on Stall Margin and Tip Clearance Flow in a Low-Speed Axial Compressor

Experimental And Numerical Investigation Of Effect Of Center Offset Degree On Compressor Stability With Circumferential Grooved Casing Treatment

Cfd Investigation On The Circumferential Grooves Casing Treatment Of Transonic Compressor

Axial Transonic Compressor Performance Enhancement with Circumferential Grooves

Effect of Inclination Grooves on Axial Flow Compressor Stability: an Experimental and Numerical Simulation Study

Numerical Investigation for the Impact of Single Groove on the Stall Margin Improvement and the Unsteadiness of Tip Leakage Flow in a Counter-Rotating Axial Flow Compressor

Investigation on the Circumferential Grooves Effects in a Two-Stage Axial Flow Compressor

Mechanism of stall margin improvement in a centrifugal compressor with circumferential grooves casing treatment