Abstract:This work aims to elucidate the hot deformation behavior and microstructure evolution of a non-equimolar TiZrHf-rich refractory high-entropy alloy (RHEA) with a composition of Ti2ZrHfV0.5Ta0.2 (at. %). The as-cast Ti2ZrHfV0.5Ta0.2 alloy composed solely of a body-centered cubic phase showed superior tensile mechanical properties with a yield strength of 865 MPa and a total elongation of 22.5%. The uniaxial compression tests were performed at temperatures ranging from 900 to 1100 °C and strain rates varying from 10−3 to 10−1 s−1. The relation among the flow stress, deformation temperature, and strain rate was represented by the Arrhenius-type constitutive equations. The calculations show a comparatively low apparent activation energy of 144–119 kJ/mol over the entire range of strains, revealing a noticeable contradiction between the concentration of group IV elements (Ti, Zr, Hf) and the high-temperature strength. The excessive addition of Group IV elements tends to deteriorate the high-temperature strength due to the relatively low melting points and self-diffusion activation energies of Group IV elements. The misorientation analysis based on electron back-scattered diffraction indicated that the dynamic recrystallization mechanism depends strongly on the thermo-mechanical processing conditions. A low deformation temperature and high strain rate results in an abnormal discontinuous dynamic recrystallization mechanism. Additionally, the dominant role played by the edge dislocation in RHEAs during deformation is supposed to be the reason for the abnormal discontinuous dynamic recrystallization mechanism. A series of stress drops were observed under low deformation temperatures and high strain rates. Based on an interrupted hot-compression experiment and a strain aging experiment, the stress drop can be attributed to the unlocking of dislocations pinned by the Cottrell atmosphere or short-range ordering.

Unique Deformation Behavior And Microstructure Evolution In High-Temperature Processing Of A Low-Density Tialvnb2 Refractory High-Entropy Alloy

Hot deformation behavior and microstructure evolution of non-equimolar Ti2ZrHfV0.5Ta0.2 refractory high-entropy alloy

Unique Deformation Behavior and Microstructure Evolution in High Temperature Processing of HfNbTaTiZr Refractory High Entropy Alloy

The Microstructures, Mechanical Properties, and Deformation Mechanism of B2-Hardened NbTiAlZr-Based Refractory High-Entropy Alloys

Dynamic behavior and microstructure characterization of TaNbHfZrTi high-entropy alloy at a wide range of strain rates and temperatures

Phase evolution and mechanical properties of low-activation refractory high-entropy alloy Ti1.5ZrV0.5Ta0.5

Hot deformation behavior and microstructure evolution of a novel Mn-containing HEA

Intermediate-temperature creep behaviors of an equiatomic VNbMoTaW refractory high-entropy alloy

The evolution of compositional and microstructural heterogeneities in a TaMo0.5ZrTi1.5Al0.1Si0.2 high entropy alloy

Flow Behavior and Microstructure of Hot‐Worked TiNbTaVW Refractory High‐Entropy Alloy

Phase Stability and Microstructural Evolution in a Ductile Refractory High Entropy Alloy Al 10 Nb 15 Ta 5 Ti 30 Zr 40

Intrinsic factors responsible for brittle versus ductile nature of refractory high-entropy alloys

High-temperature structural and mechanical stability of refractory high-entropy alloy Nb40Ti25Al15V10Ta5Hf3W2

Controlling microstructure and mechanical properties of Ti-V-Cr-Nb-Ta refractory high entropy alloys through heat treatments

Microstructures and mechanical properties of TiZrHfNbTaWx refractory high entropy alloys

Effect of Ti and Nb Contents on Microstructure and Mechanical Properties of HfZrVTaMoWTi x Nb y Refractory High‐Entropy Alloys

Microstructure evolution and mechanical properties of NbHfTiVCx novel refractory high entropy alloys with variable carbon content

Unleashing the microstructural evolutions during hot deformation of as-cast AlCoCrFeNi 2.1 eutectic high entropy alloy

Effects of Ti content on the tensile ductility, lattice distortion and mechanical properties of VNbTaTi x refractory high-entropy alloys

Hot deformation behavior and dynamic recrystallization mechanism of Ti 2 ZrTa 0.75 refractory complex concentrated alloy

Microstructure and strengthening mechanisms of novel lightweight TiAlV0.5CrMo refractory high-entropy alloy fabricated by mechanical alloying and spark plasma sintering