Abstract:Ruthenium addition was found to be beneficial in inhibiting the formation of the detrimental topologically closed-packed (TCP) phases in Ni-based single crystal superalloys; thus, the Ni–Cr–Ru phase stability is very valuable for better understanding of the constitutional effects of Ru in multicomponent Ni-base superalloys. Four isothermal sections of the Ni–Cr–Ru system at 800 °C, 900 °C, 1000 °C and 1200 °C were constructed from results obtained from diffusion multiples using scanning electron microscopy (SEM) and electron probe microanalysis (EPMA). The measured phase equilibria together with prior experimental results were used to optimize a CALPHAD thermodynamic description of the Ni–Cr–Ru ternary system using thermodynamic parameters of the Ni–Cr and Ni–Ru systems published in the literature and modified Cr–Ru parameters from the current study. The intermetallic compound sigma phase in the Cr–Ru system was described with a simplified two-sublattice model, (Cr,Ru)20(Cr,Ru)10, by taking into account future extension of the model into higher order systems. Comparison between the calculated results and the experimental measurements was made to demonstrate the reliability of the current thermodynamic parameters for the Ni–Cr–Ru system. For easy implementation of the thermodynamic parameters into some existing thermodynamic databases, a version of the thermodynamic description of the Ni–Cr–Ru system with an older sublattice model, (Cr,Ni,Ru)10(Cr)4(Cr,Ni,Ru)16, for the sigma phase was also developed.

Thermodynamic Modeling of the Re-Ru, Ru-W and Re-Ru-W Systems

Thermodynamic Assessment of the Ni-Co-M1 (M1 = Re, Ru) and Ni-Re-M2 (M2 = W, Ta) Superalloy Systems over the Whole Composition

Thermodynamic Modeling of the Al–Co–W, Al–Ni–Ta and Co–Ni–W Ternary Systems

Experimental determination of the Ni–Cr–Ru phase diagram and thermodynamic reassessments of the Cr–Ru and Ni–Cr–Ru systems

Experimental Investigation and Thermodynamic Assessment of Phase Equilibria in the Cr-Re-Ru Ternary System

Thermodynamic Assessment of the Co–Mo–Ni and Mo–Ni–W Ternary Systems

The Effects of Key Elements Re and Ru on the Phase Morphologies and Microstructure in Ni-based Single Crystal Superalloys

Experimental Phase Diagram, Thermodynamic Modeling and Solidified Microstructure in the Mo–Ni–W Ternary System

High-throughput experimental determination and thermodynamic assessment of phase diagrams of nickel-based superalloys

Experimental Investigation and Thermodynamic Assessment of the Ni–Zr–Y Ternary System

Thermodynamic Modeling of the Ni–Nb–V Ternary System

Thermodynamic Modeling of the C-Co-Mo and C-Mo-Ni Ternary Systems

Phase Equilibria in the Al–C–Ni–W Quaternary System

Thermodynamic Investigation of Phase Equilibria on the (W,mo)c-(Co,ni) Cemented Carbides

Thermodynamic Modelling and Gulliver-Scheil Simulation of Multi-Component Al Alloys

Thermodynamic Re-Assessment and Liquidus Projection of the Cu–Ni–Ti System

An Experimental Study and Themodynamic Evaluation of the Fe-Ti-W System at 1000°C

Experimental study and thermodynamic modeling of the Al-Co-Cr-Ni system

Experimental Investigation and Thermodynamic Calculation of the Phase Equilibria in the Cu-Cr-W and Cu-Cr-Mo Systems

Thermodynamic Description of Phase Equilibria in the C–Mo–W–N Quaternary System

An Overview on Phase Equilibria and Thermodynamic Modeling in Multicomponent Al Alloys: Focusing on the Al–Cu–Fe–Mg–Mn–Ni–Si–Zn System