Abstract:Silicon-based optoelectronics, using the mature silicon-based microelectronic complementary metal oxide semiconductor (CMOS) manufacturing process, is a large-scale optoelectronic integration platform that has attracted much attention. Surface plasmonic devices have also received extensive attention in the past decades, and especially the silicon-based surface plasmonic nanofocusing devices have become a research hotspot. Typical nanofocusing structures include chirped surface gratings, plasmonic Fresnel zone plate, nano-slit array, tapered metal tips. However, there occur some inevitable problems in these devices, such as the fine structure being too complex to be fabricated and too large transmission loss of metal slot waveguide. In this work, an ultra-compact hybrid surface plasmon nanofocusing device is designed and fabricated by the silicon-based optoelectronic technology, and the nanofocusing performance of the device is also experimentally verified. The hybrid surface plasmon nanofocusing devices are fabricated on a silicon-on-insulator (SOI) wafer by electron beam lithography (EBL) system. The silicon wire waveguides, tapers and the thin silicon strips in the middle of nanofocusing regions are patterned in only one step EBL. The gold layer is formed by a deposition and lift-off process, and then a partially etching process is introduced to make the thickness of the middle thin silicon strips the same as that of the gold layer. With a 1.23-mu m-long tapered structure, our nanofocusing devices focus the light field of a silicon strip waveguide into a hybrid surface plasmon waveguide, making non-resonant optical field increase 20 times in the 1550 nm near-infrared band experimentally. The entire insertion loss is about 4.6 dB, and the mode area of the nanofocusing area is about (lambda/n)(2) / 6 40 which is over 300 times smaller than that of the input silicon waveguide. When the middle slot silicon waveguide width W-Si = 120 nm, the insertion loss reaches a minimum value of 2.8 dB. In our design, we adopt the design of silicon-based hybrid plasmonic waveguides. In this design, a layer of material with low refractive index is inserted between the metal layer and the silicon layer to act as a "container" of light field, which makes this silicon-based hybrid plasmonic waveguides have less loss than the traditional metal plasmonic waveguides, and can still maintain high optical field localization. Such silicon-based hybrid surface plasmon nanofocusing devices with simple structures and excellent performances are promising alternatives for future applications in optical field manipulation, optical sensing, nonlinear optical devices, and optical phase-change storage.

Focusing and Defocusing Switching of an Indium Selenide-Silicon Photonic Metalens.

Helicity-multiplexed bifocal geometric metalenses at visible wavelength

A versatile metasurface for meta-nanoprinting and bifocal metalens

Enhancing Focusing and Defocusing Capabilities with a Dynamically Reconfigurable Metalens Utilizing Sb2Se3 Phase-Change Material

Multifunctional metalens generation via bilayer phase-change metasurfaces at near-infrared wavelength

Sub-wavelength Focusing Based on All-Dielectric Polarization-Independent Metalens

Varifocal Metalens Using Tunable and Ultralow‐loss Dielectrics

Coherently switching the focusing characteristics of all-dielectric metalenses

Experimental research on ultracompact silicon hybrid plasmonic nanofocusing device

Novel tunable graphene-based metasurface of metalens

Near-Infrared Tunable Metalens Based On Phase Change Material Ge2se2te5

Metalens with mono-layered-film phase compensation mechanism realizing subwavelength focusing

Numerical Study of Mid-Infrared Tunable Metalenses Based on Ge2Sb2Te5 Phase-Change Material

Near-infrared tunable metalens based on phase change material Ge 2 Sb 2 Te 5

Thermally-Switchable Metalenses Based on Quasi-Bound States in the Continuum

Optically reconfigurable metasurfaces and photonic devices based on phase change materials

High-efficiency, Linear-Polarization-multiplexing Metalens for Long-Wavelength Infrared Light.

Multifunctional Metasurface Lens With Tunable Focus Based on Phase Transition Material

Reconfigurable all-dielectric metalens with diffraction-limited performance

Reflective Quasi-Continuous Metasurface with Continuous Phase Control for Light Focusing

Wavelength-actuated varifocal and polarization-insensitive metalenses assisted by monolayer single-celled phase-change metasurfaces