Abstract:High numerical aperture (NA) metalenses with large focusing efficiency are crucial for various applications in modern optics and photonics, particularly in high resolution imaging, high directivity lasing process and so on. Recent progresses have been achieved in designing high NA metalenses which can surpass conventional ones but mainly in the visible and infrared regimes by using all-dielectric metasurfaces. Here, multilayer phase gradient metallic metasurfaces sandwiched by filling dielectrics are employed to design high NA and large efficiency metalenses in the low spectrums. Benefiting from its high transmission amplitude and the full phase control to the incident waves of the proposed gradient meta-atoms with a double split ring resonator, the designed ultra-thin and small footprint four-layer metalens (5λ × 5λ × 0.23λ, λ is wavelength) demonstrates a high NA in the order of 0.8 and the large focusing efficiency around 40% according to the full-wave simulations and experimental measurements. Furthermore, the influences of the dielectric thickness and the layer number of stacked meta-atoms on the presented high NA metalens are investigated. The results reveal that the NA of proposed metalens can be surprisingly further improved from 0.8 to 0.9 by increasing dielectric thickness and/or the focusing efficiency can be enhanced to above 50% by adding the layer number of the stacked meta-atoms. These findings also imply that our high NA metalens in low spectrum can be compatible to the standard printed circuit board fabrication and also posses of good robustness to the metasurface layer number. The presented work provides new vistas to develop high NA and large efficiency metalens in low microwave or Terahertz (THz) spectrum, where the metallic metasurfaces are commonly used. Besides, it can benefit to the development of various novel metadevices such as miniaturized high-gain lens antenna, compact cloaks and many others in modern microwave engineering and/or THz optics.

Metalens with mono-layered-film phase compensation mechanism realizing subwavelength focusing

A versatile metasurface for meta-nanoprinting and bifocal metalens

Metalens-integrated Compact Imaging Devices for Wide-Field Microscopy

Helicity-multiplexed bifocal geometric metalenses at visible wavelength

Sub-wavelength Focusing Based on All-Dielectric Polarization-Independent Metalens

Ultra-thin, Zoom Capable, Flexible Metalenses with High Focusing Efficiency and Large Numerical Aperture

Multifunctional metalens generation via bilayer phase-change metasurfaces at near-infrared wavelength

Monolithically integrated wide field-of-view metalens by angular dispersionless metasurface

High numerical aperture and large focusing efficiency metalens based on multilayer transmitarray elements

Enhancing Focusing and Defocusing Capabilities with a Dynamically Reconfigurable Metalens Utilizing Sb2Se3 Phase-Change Material

Broadband Achromatic Polarization Insensitive Metalens Design in the Near-Infrared Spectrum

Planar Metalens Realizing Subwavelength Focusing

Visible-light Metalens Far-Field Nanofocusing Effects with Active Tuning of Focus Based on MIM Subwavelength Structures Used in an Integrated Imaging Array

Longitudinal tri-foci Metalens empowered multiple-magnification and diffraction-limited microscope

High-efficiency, Linear-Polarization-multiplexing Metalens for Long-Wavelength Infrared Light.

Wavelength-actuated varifocal and polarization-insensitive metalenses assisted by monolayer single-celled phase-change metasurfaces

Phase and dispersion engineering of metalenses: broadband achromatic focusing and imaging in the visible

A single-layer panoramic metalens with > 170° diffraction-limited field of view

Off-chip Far-field Focusing with Annular Coupling Gratings

Design of Multiwavelength Confocal Plane Multifocal Metalens Based on CGH in Visible Band

Liquid Crystal Integrated Dynamic Terahertz Metalenses