Abstract:External gear pumps are among the most popular fluid power positive displacement pumps; however, they often suffer from excessive flow pulsation transmitted to the downstream circuit. To meet the increasing demand of quiet operation for modern fluid power systems, it is necessary to give a physically sound method of analyzing the operation of a volumetric pump. The analysis of the basic approach used by the majority of researchers for calculating the flow rate of a gear pump by E.M. Yudin is presented. The article presents a new method for analyzing the operation of volumetric pumps. The method is suitable for the pumps whose dynamic characteristics should be considered according to the model of an equivalent source of flow fluctuations by V.P. Shorin. The method is based on wave theory, the method of hydrodynamic analogies and the impedance method, where the pump is considered according to the model in lumped parameters. The method consists in determining the pressure pulsations at the pump output in bench systems with known dynamic characteristics and recalculating the pump flow rate in pulsations. Computational dynamic models of bench systems in lumped parameters are proposed for subsequent use in dynamic tests of pumps in the form of equivalent sources of fluid flow fluctuations. We give recommendations for the formation of test bench systems with a throttle, a cavity and a pipeline at the pump output. Using the example of an external gear pump with a working volume of 14 cm3/rev, the implementation of the proposed method is considered. The pump's own pulsation characteristic of the flow rate in a bench system with an "infinitely long" pipeline along two harmonic components of the spectrum is determined, and a test of the method based on the method of determining the instantaneous flow rate by R.N. Starobinskiy is proposed. It is shown that, according to the proposed method and the method of R.N. Starobinskiy, the divergence of the amplitudes of flow pulsations does not exceed (5–10)%. The high degree of coincidence of the results confirms that the external gear pump in question should be considered according to the equivalent source of flow fluctuations model.

Performance Analysis of a Centrifugal Pump Based on Noise

Experimental and numerical investigations on pressure pulsation in a pump mode operation of a pump as turbine

Performance Prediction of Centrifugal Pump Based on the Method of Numerical Simulation

Comprehensive Performance Measurement for Closed-circuit Variable Displacement Pump

Quantitative Analysis of Energy Loss and Vibration Performance in a Circulating Axial Pump

Numerical and Experimental Study on the Flow-Induced Noise Characteristics of High-Speed Centrifugal Pumps

Investigation on Inner Flow Quality Assessment of Centrifugal Pump Based on Euler Head and Entropy Production Analysis

A Hybrid Lumped Parameters/Finite Element/Boundary Element Model to Predict the Vibroacoustic Characteristics of an Axial Piston Pump

Transient flow and noise characteristics of vortex-turbulence-noise interaction in centrifugal pump

A Performance Test and Internal Flow Field Simulation of a Vortex Pump

Cyclostationary Approach to Detect Flow-Induced Effects on Vibration Signals from Centrifugal Pumps

Simulation Research on Distribution Method of Axial Piston Pump Utilizing Pressure Equalization Mechanism

Optimization of a Centrifugal Pump to Improve Hydraulic Efficiency and Reduce Hydro-Induced Vibration

Experimental Investigation on the Noise Reduction of an Axial Piston Pump Using Free-Layer Damping Material Treatment

Experimental and Numerical Investigations of the Noise Induced by Cavitation in a Centrifugal Pump

New Method to Determine the Dynamic Fluid Flow Rate at the Gear Pump Outlet

Investigation Into The Effects Of Index Angle On Fluidborne Noise And Structureborne Noise Of A Tandem Axial Piston Pump

Assessment of cavitation noise in a centrifugal pump using acoustic finite element method and spherical cavity radiation theory

Investigation on Flow-Induced Noise due to Backflow in Low Specific Speed Centrifugal Pumps

Prediction of the Noise from A Multi-Stage Centrifugal Pump

Noise analysis of dry scroll vacuum pump based on experiment and CFD