Numerical and Experimental Study on the Flow-Induced Noise Characteristics of High-Speed Centrifugal Pumps

Qiaorui Si,Chunhao Shen,Xiaoke He,Hao Li,Kaile Huang,Jianping Yuan
DOI: https://doi.org/10.3390/app10093105
2020-04-29
Applied Sciences
Abstract:The development of low-noise pumps is essential to design quiet fluid delivery systems. Due to the complicated internal flow, the flow-induced noise characteristics of high-speed centrifugal pumps have not been well understood. Taking engine cooling pumps as an example model, experimental measurements are performed in a semi-anechoic room and a CFD/CFA calculation method is proposed to study the fluid-borne noise and radiated noise characteristics. In the speed range of 5000–6750 r/min, both the pump head and the dimensionless radiated noise characteristics conform to similar laws, and the highest efficiency point pump presents the lowest noise level. Consistent with the experimental results, the predicted radiated noise of the model pump presents dipole characteristics at the required flow rate condition. Moreover, the spectrum of fluid borne noise at pump outlet shows broadband characteristics but with obvious discrete peaks, which are not only related to the fluid pressure pulsation characteristics (6f0 and the multiple) at the low-frequency region, but also to the frequency of the structural mode (3000–6000 Hz region). Rotor-stator interaction of the pump flow field between the impeller and volute is the main reason of flow-induced noise; unstable flow also contributes to the broadband components in the noise spectrum.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the flow - induced noise characteristics generated during the operation of high - speed centrifugal pumps. Specifically, the research aims to deeply understand the noise mechanism caused by the complex flow inside high - speed centrifugal pumps through a combination of numerical simulation and experimental measurement methods, thereby providing theoretical and technical support for the design of low - noise fluid transportation systems. The paper mentions that although increasing the rotational speed of the pump can reduce the volume of the pump, it also brings serious vibration and noise problems at the same time, and these problems have an adverse impact on the environment. Therefore, studying the generation mechanism of flow - induced noise is of great significance for developing quieter and more reliable cooling systems. In the paper, a method combining computational fluid dynamics (CFD) and computational fluid acoustics (CFA) is adopted to study the characteristics of fluid noise and radiation noise, and the accuracy of the calculation results is verified through experiments. The experimental part is carried out in a semi - anechoic chamber to reduce the interference of external noise, and high - precision instruments and equipment are used to measure the performance parameters and noise levels of the pump. Through these studies, the author hopes to reveal the noise characteristics and generation mechanisms of high - speed centrifugal pumps under different working conditions, and provide a scientific basis for reducing the noise level of the pump.