Abstract:Fouling is one of the most significant problems for internally enhanced tubes installed in the shell and tube condensers. Due to the lack of long-term test data, current fouling models are developed based on accelerated particulate fouling tests that have the low precision and hence are inapplicable for predicting combined fouling in most practical cooling tower systems. In addition, the constant values of fouling resistance (factor) recommended by the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) are extremely limited under different operating conditions. To overcome these challenges, this research developed and validated two fouling prediction models based on experimental long-term tests. One of the models was in the form of a ratio of asymptotic fouling resistance of the enhanced tube to that of the plain tube (<math>Rf∗/Rf,p∗</math>), and the other one was in the form of the asymptotic fouling resistance of the directly enhanced tube (<math>Rf∗</math>). Both models considered water quality, water velocity, and the tube geometries as the variables with the acceptable accuracy for prediction. 1) For the water quality, the parameter of valid concentration (<math>Ccom</math>) of cooling water was defined in this study, which reflected the potential amount of valid components to form the fouling. 2) For the water velocity, its impacts on the two critical parameters of the fouling process: sticking probability (<math>P</math>) and deposit bond strength (<math>ξ</math>) were investigated using experimental studies. Test results showed that in enhanced tubes with the increased water velocity the sticking probability (<math>P</math>) decreased continuously while the deposit bond strength (ξ) initially increased, and then, decreased. 3) For the tube geometries, by taking the parameters of tube geometries as variables the multi-variable correlations of the sticking probability (<math>P</math>) and deposit bond strength (<math>ξ</math>) were developed. From the results the generalized fouling prediction model as a ratio of asymptotic fouling resistance (<math>Rf∗/Rf,p∗</math>) was recommended for the application in HVAC&R industry due to its suitability and accuracy in practical project applications.

A New Model Based on the Cake Removal and the Re-Deposition Mechanism in the Rinsing Process

A new mathematical model to describe the trans-membrane pressure in the coupled cleaning process (rinsing + backwash)

Modeling of the Variations of Permeate Flux, Concentration Polarization, and Solute Rejection in Nanofiltration System

Simulating and Predicting the Flux Change of Reverse Osmosis Membranes over Time During Wastewater Reclamation Caused by Organic Fouling.

Modelling of Membrane Fouling in a Submerged Membrane Bioreactor

Comparison of the Reverse Osmosis Membrane Fouling Behaviors of Different Types of Water Samples by Modeling the Flux Change over Time.

Microscopic Mechanism Of Membrane Fouling In Micro-Filtration

Fouling Characteristics and Flux Prediction Model of Reverse Osmosis Membrane Based on Hydrophobic Fractions in Reclaimed Water

Modeling of NF/RO membrane fouling and flux decline using real-time observations

Rough or wiggly? Membrane topology and morphology for fouling control

Identification of fouling mechanisms in MBRs at constant flowrate: model applications and SEM-EDX characterizations

A combined model for describing the trans-membrane pressure (P) variation in constant flux dead-end microfiltration (MF) process

Cake Layer Fouling Potential Characterization for Wastewater Reverse Osmosis via Gradient Filtration

Evaluation of Organic and Inorganic Foulant Interaction Using Modified Fouling Models in Constant Flux Dead-End Operation with Microfiltration Membranes

Optimization of coupling filtration and rinsing processes by Pontryagin maximum principle

Study on membrane fouling of submerged membrane bioreactor in treating bathing wastewater.

A new combined cake-complete model with the cake resistance corrected by cake filtration equilibrium coefficient in cross-flow microfiltration

Prediction of reverse osmosis membrane fouling in water reuse by integrated adsorption and data-driven models

Exploring the pressure change of reverse osmosis filtration: Time-course pressure curves and a novel model for mechanism study and NEWater application

A generalized prediction model of waterside fouling for internally enhanced tubes in shell and tube condensers

Revealing the Membrane Fouling Mechanism Caused by the Denitrification Filter Effluent During Ozonation by Model Assessment