Abstract:Thermal conductive shape‐stabilized composite phase change materials (PCMs) were produced using polyacrylic acid (PAA), dodecanol (DDA) and carbon nanofiber (CNF) by solution blending route. In the composites, DDA was used as the material with latent heat thermal energy storage (LHTES) capability and PAA was introduced as the main supporter and shape stabilizer material for DDA. CNF was employed for two reasons: (i) to enrich the heat‐storing/releasing rate of the polymer‐based composite as the conductive nanofillers and (ii) to contribute to increasing the DDA adsorption rate in the shape‐stabilized composites. In this regard, a series of LHTES materials were presented, comprising of PAA/DDA composite, and PAA/DDA composite PCMs doped with CNF of 4 and 10 wt%. Composite PCMs exhibited well shape stabilization performance even with a high amount of DDA (70 wt%) due to both the cross‐linked spatial structure of PAA and the uniform dispersion of CNF in the composite. Fourier transform infrared spectroscopy and X‐ray diffraction findings indicated that there was no chemical bonding in PAA/DDA or PAA/DDA/CNF composites. DSC analysis revealed the highly favourable LHTES properties of the PAA/DDA(70 wt%)/CNF(10 wt%) composite, melting at 18.04°C and having a phase change enthalpy as high as 157.03 J/g. The thermal gravimetric analysis results showed that this composite had excellent thermal resistance to mass degradation up to 125°C. Thermal conductivity measurements indicated the significant effect of the CNF doping on the increment of the thermal conductivity of the PAA/DDA composite. All test results suggest that especially shape‐stabilized PAA/DDA/CNF composite PCM can be evaluated as energy‐saving materials for thermal management of buildings. DSC analysis revealed the highly favorable LHTES properties of the PAA/DDA(70 wt%)/CNF(10 wt%) composite as melting at 18.04°C and having a phase change enthalpy as high as 157.03 J/g. PAA/DDA(70 wt%)/CNF(10 wt%) composite had an excellent thermal resistance. CNF doping lead to a significant increment in the thermal conductivity of the PAA/DDA composite. All test results suggest that especially shape‐stabilized PAA/DDA/CNF composite PCM can be evaluated as energy‐saving materials for thermal management of buildings.

Study on a Polyhexahydrotriazine Resin with Recyclability and Intrinsic Thermal Conductivity

Effects of Dibenzocrown Ether and Diphenoxyethylene Diether Structural Units on the Properties of Degradable Polyhexahydrotriazine Thermosetting Resins

Recyclable Technology of Thermosetting Resins for High Thermal Conductivity Materials Based on Physical Crushing

Recyclable Tough Thermoset with Imide-Hexahydrotriazine Structure

Recyclable polytriazole resins with high performance based on Diels-Alder dynamic covalent crosslinking

Preparation and Properties of a Novel Polytriazole Resin

Recyclable thermoset hyperbranched polymers containing reversible hexahydro-s-triazine

Effect of carbon nanotubes on mechanical performance and thermal stability of recyclable thermosets poly(hexahydrotriazine)s-based composites

Synthesis and cryogenic performance of closed-loop recycled Al2O3/epoxy resins composites

Epoxy composites with high thermal conduction routes via in situ constructing "pea‐pod‐like" alumina‐boron nitride 3D structure

Enhanced thermal conductivity in copolymerized polyimide

Recyclable and Elastic Highly Thermally Conductive Epoxy-based Composite with Covalent-Noncovalent Interpenetrating Network

Thermal energy storage characteristics of polyacrylic acid/dodecanol/carbon nanofiber composites as thermal conductive shape‐stabilized composite phase change materials

Mechanically strong, reprocessable and thermally stable PDMS/Hexagonal boron nitride composites with desirable thermal conductivities based on dynamic silyl ether linkages

Study on Thermal Conductivity and Mechanical Properties of Cyclotriphosphazene Resin-Forced Epoxy Resin Composites

Polymer/Alumina Nanofiber Composite Sheets with Anisotropic High Thermal Conductivity

Effect of the Structure of Epoxy Monomers and Curing Agents: Toward Making Intrinsically Highly Thermally Conductive and Low-Dielectric Epoxy Resins

Mechanical Properties and Thermal Conductivity of Thermal Insulation Board Containing Recycled Thermosetting Polyurethane and Thermoplastic

Dynamic reversible mechanism of phenol-carbamate bonds and their potential for the development of thermo-healing, recyclable and high-performance epoxy thermosets

Preparation of highly thermally conductive epoxy composites via constructing a vertically aligned foam of cetyltrimethylammonium bromide–graphene@polydopamine–multi-walled carbon nanotubes

Improving through-plane thermal conductivity of PDMS-based composites using highly oriented carbon fibers bridged by Al2O3 particles