Abstract:Tungsten trioxide (WO3) thin films were synthesised by electrodeposition using peroxotungtic acid as the precursor electrolyte solution for use as photoanodes in a photoelectrochemical cell for solar hydrogen applications. The films were coated at deposition potentials varying from 0.30 to 0.90V versus Ag/AgCl in order to study the effect of the potential on the mineralogical, morphological, optical, and photoelectrochemical properties of the nanoparticulate films. The films were composed of monoclinic WO3, the degree of crystallinity and preferred orientation of the orthogonal planes of which increased with deposition potential and associated film thickness. In contract, increasing the deposition potential had a minimal impact on the particle sizes, which were in the range ∼80-90nm. While films deposited at the potential range of 0.30 to 0.60V showed controlled nanostructures with thicknesses in the range 168-431nm, increasing the deposition potential from 0.70 to 0.90V resulted in rapid increase in film, which led to cracking from drying stress. Linear voltammetry data suggested that the optimal potential for the deposition of stable films was in the range 0.37 to 0.60V. However, the data for the film deposited at a potential of 0.30V indicated a film of high quality. Further, the data for the film deposited at a potential of 0.60V indicated a film of a low quality and so this voltage represents a transition point for stable-unstable film growth and unstressed-stressed nanostructure from drying. The trends in the optical transmission properties showed that the photocatalytic activity of the films could be expected to decrease with increasing potential, thickness, and crystallinity. That is, the band gap and projected absorption edge exhibited a red shift. This was attributed to the relative effects of the surface and volume band gaps, in which the latter would increase relative to the former with increasing thickness. The photocurrent densities reflected the effects of increasing solid volume and decreasing band gap with increasing film thickness. The exception was the reduced performance of the film deposited at the potential of 0.60 V. This outcome was attributed to the competition between the photogeneration and recombination of electron-hole pairs, where the potential of 0.60V represents the transition point described above.

Preparation and Photoelectrocatalytic Properties of WO<sub>3</sub>/Pt Composite Film

Preparation and Photoelectrochemical Properties of Nano-Porous Tungsten Trioxide Films Electrode

Synthesis of Pd/WO 3 and Pt/WO 3 composite particles by sonochemical reactions and evaluation of their photocatalytic performance

Preparation and Characterization of WO3-TiO2 Film Composite Photocatalyst in Ultrasonic Filed

Preparation of Nanoparticle WO_3-doped TiO_2 and Research on Its Photocatalytic Activity

Synthesis, Characterization and Photocatalytic Performance of Rod-Shaped Pt/PbWO4 Composite Microcrystals

Photoelectrochemical and physical properties of WO3 films obtained by the polymeric precursor method

Preparation of WO3/TiO2 nanorod composites and its photocatalytic activity

Composites Based on Electrodeposited WO3 and TiO2 Nanoparticles for Photoelectrochemical Water Splitting

Electron Regulation in Pt-M (M = Cu, Co, and Ni) Decorated WO3 Thin Films for Photocatalytic Degradation Performance

Enhanced Photoelectrochemical Performance Using Cobalt-Catalyst-Loaded PVD/RF-Engineered WO3 Photoelectrodes

Preparation and Photocatalytic Activity of WO3/TiO2 Nanocomposite Particles

Preparation and characterization of a novel WO_3/W photoanode

Preparation of Vertically Aligned WO3 Nanoplate Array Films Based on Peroxotungstate Reduction Reaction and Their Excellent Photoelectrocatalytic Performance

Preparation and enhanced photoelectrochemical performance of a p–n heterojunction CuFe2O4/WO3 nanocomposite film

Highly enhanced photocatalytic activity of WO3 thin films loaded with Pt–Ag bimetallic alloy nanoparticles

Photoelectrochemical Properties of WO3 Thin Films Prepared by Electrodeposition

Preparation of WO_3/TiO_2 Nanorod Composites and Its Photocatalytic Activity

Enhanced Photocurrent–voltage Characteristics of WO3/Fe2O3 Nano-Electrodes

In-situ Preparation of WO3/TiO2 Composite Film with Increased Photo Quantum Efficiency on Titanium Substrate

Pt@Cu2O/WO3 Composite Photocatalyst for Enhanced Photocatalytic Water Oxidation Performance