Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. In order to improve the path tracking performance and stability of intelligent vehicles during steering and collision avoidance working condition, an integrated control method combining four-wheel steering, active suspension and direct yaw-moment is proposed. Firstly, a unified chassis dynamics model with 18 degrees-of-freedom (DOF) is established, which includes steering, braking and suspension subsystems. Phase plane analysis results for both traditional 2-DOF bicycle model and the 18-DOF model are compared. The results show that although the uneven road has a certain influence on the phase portraits of sideslip angle and sideslip angular velocity of the 18-DOF model, the overall trend is consistent with those of the 2-DOF model. Secondly, a general control framework for steering and collision avoidance of autonomous vehicle is put forward, consisting of the steering control for path tracking, and active suspension and direct yaw-moment control for stability. The collision avoidance reference path is planned by the fifth-degree polynomial, and three types of steering control methods including optimal control front wheel steering, optimal control four-wheel steering and front wheel steering combined with feedforward and feedback control, are adopted for comparison. The main contribution of this paper is that the role of active suspension is considered in the path tracking and stability integrated control of intelligent vehicles under steering collision avoidance. The active suspension subsystem uses optimal control method by two different kinds of weight coefficients, which can be switched between "comfort mode" and "sport mode" based on the vehicle lateral acceleration. According to the phase portraits of vehicle center of gravity sideslip angle and sideslip angular velocity, the direct-yaw moment control system adopts proportional differential control method based on the distance from the state point to the stability boundary. Finally, simulations and comparative analysis are compared among four different control systems on high and low adhesion roads. The research results indicate that the integrated control system can improve the vehicle path tracking performance and stability significantly.

Model-Based Integrated Control With Vehicle States And Parameters Estimation

Integrated Model Predictive Control and Adaptive Unscented Kalman Filter for Semi-Active Suspension System Based on Road Classification

Learning-Based Hierarchical Model Predictive Control for Drift Vehicles

Integrated Control of Active Steering and Braking Systems with Tyre Forces and Cornering Stiffness Estimation

Model-Predictive-Control-Based Path Tracking Controller of Autonomous Vehicle Considering Parametric Uncertainties and Velocity-Varying

Dual Extended Kalman Filter Based State and Parameter Estimator for Model-Based Control in Autonomous Vehicles

Integrated control of in-wheel-motored electric vehicles using a model predictive control method

Integrated control for distributed in-wheel motor drive electric vehicle based on states estimation and nonlinear MPC

An NMPC-Based Integrated Longitudinal and Lateral Vehicle Stability Control Based on the Double-Layer Torque Distribution

Integrated Vehicle Chassis Control Based on Direct Yaw Moment, Active Steering and Active Stabiliser

Dual-Steering Control Strategy of 4WD EV Based on MPC

MPC-Based Integrated Control of Trajectory Tracking and Handling Stability for Intelligent Driving Vehicle Driven by Four Hub Motor

Model Predictive Control of Steering Torque in Shared Driving of Autonomous Vehicles.

Model Predictive Control of Active Suspension for an Electric Vehicle Considering Influence of Braking Intensity

Integrated Longitudinal and Lateral Vehicle Stability Control for Extreme Conditions With Safety Dynamic Requirements Analysis

MPC-based Yaw Stability Control in In-Wheel-motored EV Via Active Front Steering and Motor Torque Distribution

Optimal path tracking control for intelligent four-wheel steering vehicles based on MPC and state estimation

Application of Data-Driven Model Predictive Control for Autonomous Vehicle Steering

Integrated Control System Design of Active Front Wheel Steering and Four Wheel Torque to Improve Vehicle Handling and Stability

New Integrated Vehicle Stability Control of Active Front Steering and Electronic Stability Control Considering Tire Force Reserve Capability

Path tracking and stability integrated control of intelligent vehicles under steering collision avoidance