Abstract:Because they have the potential for ultra low NOx emissions and high efficiency, Homogeneous Charge Compression Ignition (HCCI) engines have the potential to develop a significant niche. However, a narrow operating range, (bracketed by severe knock and misfire problems), presents a formidable obstacle to developing usable HCCI combustion systems. HCCI combustion is influenced by a complex array of operating variables including fuel octane quality, intake preheating temperature, compression ratio, equivalence ratio, exhaust gas recirculation and engine component temperature. These variables affect the two critical combustion parameters: ignition timing and combustion duration. If these two parameters can be controlled by appropriate settings of the operating variables, a good HCCI combustion scheme could be achieved. Therefore, the theoretical prediction of these two combustion parameters as a function of the key operating variables is necessary for development of HCCI combustion. This paper describes a stand-alone, single-zone and multi-zone combustion model which have been developed for the specific purpose of investigating HCCI combustion control. In the multi-zone model, temperature and composition in each zone were adjusted in order to study the effect of in-homogeneity which is critical to understanding ignition timing and combustion duration in real HCCI engines. The models simulated HCCI combustion using two fuels: hydrogen, (11 species, 23 reactions- from CHEMKIN library), and natural gas, (53 species, 325 reactions- from GRI mech). The capabilities of the two models to predict ignition timing, combustion duration and peak pressure were verified against experimental and simulation results of Fiveland et al [2, 11]. The models were then used to study the effect of different in-homogeneity levels of equivalence ratio, intake temperature and residual fraction. The single zone model could only predict ignition timing while the multi-zone model shows the capability to mimic realistic HCCI combustion phenomena. The study showed that some degree of in-homogeneity is critical to predicting performance of the homogeneous charge compression ignition engine. Further, stratification of equivalence ratio was relatively ineffective at changing combustion while stratification of mixture temperature was very effective. Stratification of the residual fraction proved to be the most promising method of controlling combustion parameters and the mechanism was primarily thermal.

Detection Of Transient Low-Temperature Combustion Characteristics By Ion Current-The Missing Link For Homogeneous Charge Compression Ignition Control?

Development and Application of Ion Current/Cylinder Pressure Cooperative Combustion Diagnosis and Control System

Analysis of ion current signal during negative valve overlap of HCCI combustion with high compression ratio

Investigation of Multistage Combustion Inside a Heavy-Duty Natural-Gas Spark-Ignition Engine Using Three-Dimensional Computational Fluid Dynamics Simulations and the Wiebe-Function Combustion Model

GDI HCCI Combustion Detection Using Ion Sensing Technology

Effect of Background Turbulent Field on Ion Current Characteristics of Methane-Air Premixed Combustion

A Stand-Alone Multi-Zone Model for Combustion in HCCI Engines

Exploration of the Ion Current Method Universality and Online Combustion Monitoring

Combustion Stability Control of Dieseline PPCI Based on In-Cylinder Pressure Signals

State-of-the-art modeling of two-stage auto-ignition: Turbulence, evaporation and chemistry effects

New Gasoline Homogeneous Charge Compression Ignition Combustion System Using Two-State Direct Injection and Assisted Spark Ignition

Development and experimental validation of a field programmable gate array–based in-cycle direct water injection control strategy for homogeneous charge compression ignition combustion stability

An Autoignition Combustion Model for Homogeneous Charge Compression Ignition Engine Cycle Simulations

Real-Time Start of Combustion Detection Based on Cylinder Pressure Signals for Compression Ignition Engines

Controlling of Gasoline HCCI Combustion Phase and Transient Operation

Artificial Neural Network Aided Unstable Combustion State Prediction and Dominant Chemical Kinetic Analysis

Operating Characteristics of a Homogeneous Charge Compression Ignition Engine with Cam Profile Switching - Simulation Study

Real-time Control Oriented HCCI Engine Cycle-to-cycle Dynamic Modelling

Experimental and Computational Studies on Gasoline HCCI Combustion Control Using Injection Strategies

Machine Learning Application to Predict Combustion Phase of a Direct Injection Spark Ignition Engine

Imaging Studies of In-Cylinder HCCI Combustion