Abstract:Magnesium hydride has attracted great attention because of its high theoretical capacity and outstanding reversibility, nevertheless, its practical applications have been restricted by the disadvantages of the sluggish kinetics and high thermodynamic stability. In this work, an unexpected high reversible hydrogen capacity over 8.0 wt% has been achieved from MgH2 metal hydride composited with small amounts of LiBH4 and Li3AlH6 complex hydrides, which begins to release hydrogen at 276 degrees C and then completely dehydrogenates at 360 degrees C. The dehydrogenated MgH2 + LiBH4/Li3AlH6 composite can fully reabsorb hydrogen below 300 degrees C with an excellent cycling stability. The composite exhibits a significant reduction of dehydrogenation activation energy from 279.7 kJ/mol (primitive MgH2) to 139.3 kJ/mol (MgH2 + LiBH4/Li3AlH6), as well as a remarkable reduction of dehydrogenation enthalpy change from 75.1 kJ/mol H-2 (primitive MgH2) to 62.8 kJ/mol H-2 (MgH2 + LiBH4/Li3AlH6). The additives of LiBH4 and Li3AlH6 not only enhance the cycling hydrogen capacity, but also simultaneously improve the reversible de/rehydrogenation kinetics, as well as the dehydrogenation thermodynamics. This notable improvement on the hydrogen absorption/desorption behaviors of the MgH2 + LiBH4/Li3AlH6 composite could be attributed to the dehydrogenated products including Li3Mg7, Mg17Al12 and MgAlB4, which play a key role on reducing the dehydrogenation activation energy and increasing diffusion rate of hydrogen. Meanwhile, the LiBH4 and Li3AlH6 effectively destabilize MgH2 with a remarkable reduction on dehydrogenation enthalpy change in terms of thermodynamics. In particular, the Li3Mg7, Mg17Al12 and MgAlB4 phases can reversibly transform into MgH2, Li3AlH6 and LiBH4 after rehydrogenation, which contribute to maintain a high cycling capacity. This constructing strategy can further promote the development of high reversible capacity Mg-based materials with suitable de/rehydrogenation properties. (C) 2020 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Insights Into A Thermodynamically Optimal Synthesis Of The Ternary Complex Hydride Mg2feh6 For High-Density Thermal Energy Storage

Insights into a Thermodynamically Optimal Synthesis of the Ternary Complex Hydride Mg 2 FeH 6 for High-Density Thermal Energy Storage

Binding Energy Crossover Mechanism Enables Low-Temperature Hydrogen Storage Performance of Dual-Phase TiZrCrMnNi(VFe) High-Entropy Alloy

Recent Advances of Magnesium Hydride As an Energy Storage Material

Promoting Catalysis in Magnesium Hydride for Solid-State Hydrogen Storage Through Manipulating the Elements of High Entropy Oxides

Optimizing FeCoNiCrTi High-Entropy Alloy with Hydrogen Pumping Effect to Boost De/hydrogenation Performance of Magnesium Hydride

Synthesis And Hydrogen Storage Behaviour Of Pure Mg2feh6 At Nanoscale

Extreme high reversible capacity with over 8.0 wt% and excellent hydrogen storage properties of MgH<sub>2</sub> combined with LiBH<sub>4</sub> and Li<sub>3</sub>AlH<sub>6</sub>

Hydrogen Storage Behaviors and Microstructure of MF3 (m=ti, Fe)-doped Magnesium Hydride

In situ High-Energy Synchrotron X-ray Studies in Thermodynamics of Mg-In-Ti Hydrogen Storage System

Thermochemical heat storage performance of Fe-doped MgO/Mg(OH) 2 : Experimental and DFT investigation

Achieving superior hydrogen storage properties of MgH<sub>2</sub> by the effect of TiFe and carbon nanotubes

The Synthesis and Hydrogen Storage Properties of Pure Nanostructured Mg2FeH6

Ternary Mg-Nb-H polyhydrides under high pressure

Enhancing Hydrogen Storage Kinetics and Cycling Properties of NaMgH3 by 2D Transition Metal Carbide MXene Ti3C2

Structural inhomogeneity: a potential strategy to improve the hydrogen storage performance of metal hydrides

Formation and hydrogen storage behavior of nanostructured Mg2FeH6 in a compressed 2MgH2–Fe composite

Numerical simulation of a combined thermochemical-latent energy storage system based on paired metal hydrides and phase change material

Improved Hydrogen Storage Properties and Air Stability of Metal Hydrides by Constructing Heterophase Composites

Synthesis and Dehydrogenation Behavior of Mg–Fe–H System Prepared under an External Magnetic Field

Metal hydrides for thermochemical energy storage applications