Abstract:Ammonia is a zero-carbon candidate fuel for the decarbonization of internal combustion (IC) engines. A concern when using ammonia in IC engines is the increased emissions of nitrogen oxides (NOX), due to the additional nitrogen in the ammonia molecule. Compared to conventional petroleum such as gasoline and diesel, ammonia combustion adds the fuel NOX formation mechanism in addition to the original thermal NOX generation pathway, which further complicates the NOX emission characteristics of ammonia engines. Decoupling fuel NOX and thermal NOX helps to increase the understanding of the formation and evolutionary characteristics of nitrogen oxides occurring inside ammonia engines, but the available literature lacks studies in this respect. The purpose of this study is to fill this research gap and to propose a methodology for decoupling fuel NOX and thermal NOX. In brief, an artificial elemental nitrogen is applied to the Zeldovich mechanism and to the diatomic nitrogen in the combustion air, which allows the formation of NOX from the elemental nitrogen in the ammonia fuel to be separated from the NOX formed from the nitrogen in the air. A three dimensional (3D) computational fluid dynamics (CFD) model demonstrates the effectiveness of this approach and investigates the spatial and temporal distribution characteristics of thermal NOX and fuel NOX in the turbulent combustion field of ammonia engines. The in-cylinder activity analysis suggests that this separation of the NOX formation mechanism slightly alters the nitrogen-based chemistry, which is unavoidable. However, this approach still allows a reasonable characterization of the formation and evolution of fuel NOX and thermal NOX. The simulations show that fuel NOX is formed during ammonia oxidation because fuel NOX is an intermediate species, while thermal NOX has a high concentration in the burned zone because it is related to the temperature and the residence time of nitrogen at that temperature, both of which are expected and support the successful decoupling of fuel and atmospheric nitrogen. In addition, nitrous oxide (N2O) emissions come from the fuel NOX mechanism and are mainly distributed along the liner walls as it is formed by partial oxidation of ammonia released from the crevices during the late oxidation process. Moreover, the concentrations of both thermal and fuel-based nitrogen monoxide vary with the chemical equilibrium that changes with piston motion, and their concentrations are always comparable. As a result, combustion strategies for ammonia internal combustion engines needs to consider both thermal and fuel NOX reduction mechanisms, where the main difficulty is the N2O reduction. Catalytic combustion mode may be a viable strategy to improve the oxidation efficiency of the ammonia fuel trapped in the crevice and reduce N2O emissions in the cylinder.

Life Cycle Assessment of Nitrogen Circular Economy-Based NOx Treatment Technology

Beyond Purification: Highly Efficient and Selective Conversion of NO into Ammonia by Coupling Continuous Absorption and Photoreduction under Ambient Conditions.

Investigation of the NO removal process of ultra-low temperature adsorption-rapid regeneration

Formation and Evolution of Thermal and Fuel Nitrogen Oxides in the Turbulent Combustion Field of Ammonia Internal Combustion Engines

Bioprocesses for the removal of nitrogen oxides from polluted air

A review: Biological technologies for nitrogen monoxide abatement

Rethinking Nitrate Reduction: Redirecting Electrochemical Efforts from Ammonia to Nitrogen for Realistic Environmental Impact

Evaluation Of No Removal From Flue Gas By A Chemical Absorption-Biological Reduction Integrated System: Complexed No Conversion Pathways And Nitrogen Equilibrium Analysis

Cost-Efficient Nitrogen Oxides Control by a Hybrid Selective Noncatalytic Reduction and Selective Catalytic Reduction System on a Utility Boiler

CFD-based investigation of NO x removal from industrial waste gas by selective catalytic reduction (SCR) and selective non-catalytic reduction (SNCR) process using NH 3

Re-Acclimation Performance and Microbial Characteristics of A Thermophilic Biofilter for Nox Removal from Flue Gas

Experimental and Modeling Study on the Mechanism and Sensitive Parameters of the Thermal DeNOx Process

APPLICATION OF NANOTECHNOLOGY IN POLLUTION CONTROL OF NOx FROM STATIONARY SOURCES

Valorization systems of electrocatalytic nitrate/nitrite conversion for energy supply and valuable product synthesis

Continuous NO Upcycling into Ammonia Promoted by SO2 in Flue Gas: Poison Can Be a Gift.

Electrochemical Nitrate Reduction: Ammonia Synthesis and the Beyond

Current Advances of Integrated Processes Combining Chemical Absorption and Biological Reduction for NO X Removal from Flue Gas

Photocatalytic NO removal: complete oxidation and reduction reaction for by-product inhibition and end-product recovery

Nox Removal From Simulated Flue Gas By Chemical Absorption-Biological Reduction Integrated Approach In A Biofilter

Experimental and Kinetic Modeling Investigation of NOx Control in Coal Combustion by Ammonia Reburning

Nitrogen and nitrous oxides emission characteristics of anoxic/oxic wastewater treatment process under different oxygen regulation strategies