Abstract:Superhydrophobic surfaces are receiving increasing attention due to the enhanced condensation heat transfer, self-cleaning, and anti-icing properties by easing droplet self-removal. Despite the extensive research carried out on this topic, the presence or absence of microstructures on droplet adhesion during condensation has not been fully addressed yet. In this work we, therefore, study the condensation behavior on engineered superhydrophobic copper oxide surfaces with different structural finishes. More specifically, we investigate the coalescence-induced droplet jumping performance. on superhydrophobic surfaces with structures varying from the micro- to the nanoscale. The different structural roughness is possible due to the specific etching parameters adopted during the facile low-cost dual-scale fabrication process. A custom-built optical microscopy setup inside a temperature and relative humidity controlled environmental chamber was used for the experimental observations. By varying the structural roughness, from the micro- to the nanoscale, important differences on the number of droplets involved in the jumps, on the frequency of the jumps, and on the size distribution of the jumping droplets were found. In the absence of microstructures, we report an enhancement of the droplet-jumping performance of small droplets with sizes in the same order of magnitude as the microstructures. Microstructures induce further droplet adhesion, act as a structural barrier for the coalescence between droplets growing on the same microstructure, and cause the droplet angular deviation from the main surface normal. As a consequence, upon coalescence, there is a decrease in the net momentum in the out-of-plane direction, and the jump does not ensue. We demonstrate that the absence of microstructures has therefore a positive impact on the coalescence-induced droplet jumping of micrometer droplets for antifogging, anti-icing, and condensation heat transfer applications.

Supersonic In-Flight Induced the Air Migration and Crystallization at Droplet and Substrate Interface

Droplet Emission Induced by Ultrafast Spreading on A Superhydrophilic Surface

Experimental and Numerical Modeling for Flattening and Rapid Solidification with Crystallization Behavior of Supersonic Ceramic Droplets

Supercooled Water Droplet Impact on Superhydrophobic Surfaces with Various Roughness and Temperature

Flattening and Solidification Behavior of In-Flight Droplets in Plasma Spraying and Micro/macro-Bonding Mechanisms

Droplet Impact on Superheated Micro-Structured Surfaces

Modulation of Evaporation-Affected Crystal Motion in a Drying Droplet by Saline and Surfactant Concentrations

Surface Nanostructures Promote Droplet Splash on Hot Substrates

Effects of chemical and geometric micro-structures on crystallization of surface droplets during solvent exchange

Enhanced Coalescence-Induced Droplet-Jumping on Nanostructured Superhydrophobic Surfaces in the Absence of Microstructures

Modeling Microstructure Formation in Yttria-Stabilized Zirconia (YSZ) Droplet with High Impact Velocity in Supersonic Plasma Spray

Dynamical behavior of droplets transiently impacting on superhydrophobic microstructures

Fragmentation and Film Growth in Supersonic Nanoaggregate Aerosol Deposition

Ultrasound induced grain refinement of crystallization in evaporative saline droplets

Singular jets during droplet impact on superhydrophobic surfaces

Asymmetric Jetting during the Impact of Liquid Drops on Superhydrophobic Concave Surfaces

Evaporation Enhancement of Microscale Droplet Impact on Micro/Nanostructured Surfaces

Temperature-Induced Coalescence of Colliding Binary Droplets on Superhydrophobic Surface

Numerical investigation of solidification microstructure formation in sequential YSZ droplet impact under supersonic plasma spraying

Oblique Droplet Impact on Superhydrophobic Surfaces: Jets and Bubbles

Effect of drop size on the impact thermodynamics for supercooled large droplet in aircraft icing