Abstract:Control of corner separation in axial compressor blade rows has attracted much interest due to its potential to improve compressor efficiency and the energy utilization in turbomachinery. This paper investigates the effectiveness and mechanisms of boundary layer suction in controlling the corner separation of a highly loaded axial compressor cascade. Numerical simulations have been carried out to investigate the effect of different suction schemes on the loss downstream of the cascade and the change in incidence characteristics with the variation of the suction flowrate. The results show that the effectiveness of flow suction in controlling the flow separation depends heavily on the proportion of the blade for which it is applied. It was found that suction along part of the blade span on the suction surface could effectively remove the separation at the region of the span influenced by the suction slot. However, this resulted in a deterioration of the flow field at other parts of the span. The full-span suction scheme on the suction surface not only eliminated the separation of the boundary layer in the middle of the blade but also significantly improved the flow uniformity near the end-wall. Despite the improvement in flow uniformity using the full-span suction scheme, a three-dimensional (3D) corner separation still existed due to the strong cross-passage pressure gradient. To improve the flow field uniformity further, two combined suction schemes with one spanwise slot on the suction surface and another slot on the end-wall were designed in order to fully remove both the separated flow on the blade suction surface and the 3D corner separation. It was found that the total pressure loss coefficient was reduced significantly by 63.8% with suction flowrates of 1.88% and 0.82% for the slots on the suction surface and the end-wall, respectively. Further work showed that the behavior of the loss coefficient is different as the combination of suction flowrates is changed for different incidence. The cascade loss at high incidence operation can be more effectively reduced with suction control on the end-wall. When implementing combined suction, it is necessary to determine the best combination of suction flowrate according to the incidence level.

Numerical Investigation of an Axial Compressor Cascade with Corner Separation Control by Aspiration

Numerical and Experimental Study of Separation Control by Boundary Layer Aspiration in a Highly-Loaded Axial Compressor Cascade

Research progress of corner separation in axial-flow compressor

Effect of Boundary Layer Suction on the Corner Separation in a Highly Loaded Axial Compressor Cascade

Numerical Investigation of Secondary Flow Control by Boundary Layer Suction on the End-Wall in a Highly-Loaded Axial Compressor Cascade

Effect on corner separation control for high load compressor cascade with different end-wall BLS position

Corner Separation Control by Boundary Layer Suction Applied to a Highly Loaded Axial Compressor Cascade

An Experimental Investigation of the Corner Separation Control in a Compressor Cascade Using Spatially Oscillating Jet

Large Eddy Simulation and Combined Control of Corner Separation in a Compressor Cascade

Investigation of Control Effects of End-Wall Self-Adaptive Jet on Three-Dimensional Corner Separation of a Highly Loaded Compressor Cascade

Combined Flow Control Strategy Investigation for Corner Separation and Mid-Span Boundary Layer Separation in a High-Turning Compressor Cascade

Numerical Investigation on Corner Separation Control in a Linear Compressor Cascade by Synthetic Jet

Corner separation control by optimizing blade end slots in a linear compressor cascade

Effect of Segment Endwall Boundary Layer Suction on Compressor 3d Corner Separation

Numerical Analysis of Three-Dimensional Corner Separation in A Linear Compressor Cascade

Research on Corner Separation Control for Compressor Cascade with End-Wall Jet Flow

Experimental Study and Vortex Analysis in A Linear Compressor Cascade with Active Flow Control

Combined Control Method and Mechanism Analysis for Corner Separation in a Compressor Cascade

Influence of Endwall Boundary Layer Suction on the Flow Fields of a Critically Loaded Diffusion Cascade

Corner Separation Control by Bleed Slot at the Root of Blade

Unsteady Flow Mechanism of Corner Separation Control Using Blade End Slots in a Highly Loaded Compressor Cascade