Abstract:Owing to the presence of joint resistance and flux creep, high-temperature superconducting (HTS) coils without a power supply inevitably suffer from current decay. A flux pump is a voltage supply that requires connections with smaller footprints and a lower heat load than traditional current leads. In this study, we explain the principle of the upper limit for the output current of the traveling wave flux pumps. Based on this principle, a miniaturized linear flux pump device was developed. With narrow and misaligned iron teeth, elaborate 3D geometry of the iron pieces, and optimized driving current waveform, the miniaturized flux pump can support more than 120 A output current with only a 10 mm wide HTS tape and a compact size of 4.6 x 4.6 x 3.4 cm. Our experimental results show that the critical current of the HTS tape has a significant effect on the flux pump output. An HTS tape with a larger critical current supports a higher maximum transport current, whereas an HTS tape with a smaller critical current requires less applied current for positive output. Finally, excitation tests on HTS coils were performed. Charge/active discharge and field supplement experiments were done on a maglev HTS racetrack coil of 0.4 H, where charging/field supplement capability of the miniaturized flux pump were demonstrated up to 46.8 A (close to the critical current of the coil). It has also been proved that the flux pump can work together with an external power supply with persistent current switch. The miniaturized flux pump can also independently charge an HTS coil of 60 & mu;H to 91.6 A, which is the critical current of the coil at a low voltage criterion.

Charging Optimization of a YBCO Racetrack Coil with a Linear-Motor Type Flux Pump for an HTS Synchronous Motor

Design, Fabrication, and Testing of a YBCO Racetrack Coil for an HTS Synchronous Motor with HTS Flux Pump

Magnetic Conduction Structure Design and Charging Test of a Linear-Motor Type Flux Pump for Through-Dewar Excitation of High Temperature Superconducting Motors

Design and Study of a 2G HTS Synchronous Motor with Brushless HTS Flux Pump Exciters

Design and Key Performance of 2G HTS Coils for High Speed Superconducting Maglev Application

Miniaturized HTS linear flux pump with a charging capability of 120 A

Rotating Permanent Magnets Based Flux Pump for HTS No-Insulation Coil

Measuring the Output Voltage of a Linear-Motor Type Flux Pump With an Insulated HTS Coil

A Practical Superconducting DC Dynamo for Charging Conduction-Cooled HTS Magnet

A Design Study on 20 kW Class Axial Flux Motor with HTS Field Winding for 100 MPa Liquid Hydrogen Pump

The Performance Test of an Updated Linear-Motor Flux Pump with Single-Sided DC Winding

Control and Operation of A High Temperature Superconducting Synchronous Motor

Development of a 400 M YBCO Racetrack Coil for HTS Machine Applications

A Linear-Motor Type HTS Flux Pump With Pumped Current Exceeding 640 A

Improving the Central Magnetic Field of an HTS Magnet Using Multiple Flux Pumps

Design and Optimization of High‐Temperature Superconducting Racetrack Magnet for the Rotor of a 100‐kw Generator

Through-Wall Excitation of a Conduction Cooling HTS Magnets by a Linear-Motor Type Flux Pump

Design of Axial and Radial Flux HTS Permanent Magnet Synchronous Motor's Rotor

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Conduction-Coolled HTS Magnets Closed-Loop System Excited by a Rotating Magnets Flux Pump

Operation of Prototype Race-Track Closed-Loop HTS Coil with Metal-as-Insulation in Solid Nitrogen