Abstract:The heating rate would significantly impact the pyrolysis process, especially for the reactions containing synergistic effects between two different feedstocks. Co-pyrolysis of two widely available biomass (CC–corncob and PS–peanut shell) with plastic (PET–polyethylene terephthalate and PVC–polyvinyl chloride) was studied in a concentrating photothermal thermogravimetric analysis (CP-TGA) system at three heating rates (100, 500, 1000°C/min). The TG and DTG curves of CC and PS differ due to their polymeric components (holocellulose and lignin); two pronounced levels at 100 and 500 °C/min heating rates were present in PVC. With increasing heating rate, the lateral shift towards higher temperature regions in the TG and DTG curves exceeded 100 °C. The synergistic effects on the blend samples were concentrated in the main decomposition region (250–580°C) due to rapid volatiles release, and the discrepancy values further stabilized at the final decomposition stages. The activation energy (Ea) was assessed using a comparative study of isoconversional methods, namely Kissinger–Akahira–Sunose (KAS), Flynn–Wall–Ozawa (FWO), and Starink. The isoconversional methods demonstrated that the co-pyrolysis process required about 30 % less activation energy than the pyrolysis of plastic (PET/PVC) alone. Coats-Redfern's (CR) model-fitting approach was used to identify the kinetic triplet of the devolatilization stage. The CR models revealed that biomass–PET blends belong to two to four-dimensional diffusion models, whereas biomass–PVC blends are dominated by chemical reactions of 1.5 and 2 orders. The energy barrier between activation energy (Ea) and change in enthalpy (ΔH) for all the blend samples was lower (∼5–6 kJmol−1), which slightly increased at higher heating rate.

Thermal and Kinetic Behaviors During Co-Pyrolysis of Microcrystalline Cellulose and Styrene–Butadiene–Styrene Triblock Copolymer

Investigation of thermal behaviour and synergistic effect in co-pyrolysis of municipal solid waste and sewage sludge through thermogravimetric analysis

Investigation on the Synergistic Effect Between Different Components in Pyrolysis of Paper-Plastic Composite Material

Investigation on Thermal and Kinetic Characteristics During Pyrolysis and Co-Pyrolysis of Recovered Fuels Obtained From Municipal Solid Waste in China

Investigation on the co-pyrolysis of municipal solid waste and sawdust: pyrolysis behaviors, kinetics, and thermodynamic analysis

Thermogravimetric characteristics of typical municipal solid waste fractions during co-pyrolysis.

THERMOGRAVIMETRIC ANALYSIS AND KINETICS OF CO-CATALYTIC PYROLYSIS OF CELLULOSE AND POLYPROPYLENE BLENDS

The synergistic effects of polyvinyl chloride and biomass during combustible solid waste pyrolysis: Experimental investigation and modeling

Pyrolysis characteristics of organic components of municipal solid waste at high heating rates.

Interactions of Municipal Solid Waste Components During Pyrolysis: A TG-FTIR Study

TGA Pyrolysis and Gasification of Combustible Municipal Solid Waste

Thermal and kinetic behaviors of corn stover and polyethylene in catalytic co-pyrolysis

Thermal behavior, synergistic effect and thermodynamic parameter evaluations of biomass/plastics co–pyrolysis in a concentrating photothermal TGA

Study on the pyrolysis characteristics of the mixture of typical organic components of MSW

Effect of biomass components' interaction on the pyrolysis reaction kinetics and small-molecule product release characteristics

Interactions of three municipal solid waste components during co -pyrolysis

PYROLYTIC KINETICS OF COMBUSTIBLE OF MSW

Co-pyrolysis of cellulose and polyethylene terephthalate by TG-MS: Pyrolysis behavior, conventional gas and solid phase product characteristics.

Effects of Various Additives on the Pyrolysis Characteristics of Municipal Solid Waste

Co-pyrolysis characteristics and kinetic analysis of organic food waste and plastic.

Co-pyrolysis Behaviors and Kinetics of Plastics–biomass Blends Through Thermogravimetric Analysis