Abstract:Moisture damage is a main factor degrading the bonding performance between asphalt binder and aggregate, playing adverse effects on the integrity of pavements, and thus reducing their serviceability substantially. The asphalt pavement is susceptible to moisture damage, exhibiting weakened durability and accelerated distress in many other formations with lower service life. In this study, moisture damage was reflected in the immersion method of Marshall test, and the deterioration potential of moisture damage on the fracture behaviors of asphalt mixture was investigated through multi-scale analysis. Pull-off tests were carried out to characterize the bonding performance between asphalt binder and aggregate considering the influence of moisture erosion, and the adhesion and cohesion results were adopted as the key mechanical parameters for the subsequent numerical analysis. Semi-circular bending (SCB) tests were conducted for the specimens with or without water immersion conditioning, and the fracture parameters, including the critical strain energy release rate (J-integral), Flexibility Index (FI), Crack Resistance Index (CRI), and Balanced Cracking Index (BCI), were obtained to provide insights into the fracture performance of the asphalt mixture. Furthermore, the mechanism of moisture affecting the fracture behavior of asphalt mixtures in meso-scale was explored through numerical analysis based on finite element modeling (FEM). A virtual SCB specimen integrated with two cohesive zone models (CZM) describing the failure of asphalt mortar and the loss of adhesion between asphalt binder and aggregate was established. The results from pull-off tests indicated that water immersion could enlarge the adhesive failure area and subsequently decrease the bonding strength between binder and aggregate. However, moisture damage had a limited effect on cohesive failure performance. Results from SCB tests showed that immersion could significantly increase the moisture damage potential and the crack development speed, weaken the fracture resistance, and reduce the flexibility of the asphalt mixture. The numerical analysis method proposed in the study was effective to interpret the effect of moisture damage on the fracture behaviors of the asphalt mixture. It was found that moisture damage led to more pronounced internal damage, and more failures at the interface of binder-aggregate were observed due to the deterioration effect of moisture erosion on the adhesion. According to the fracture development under dry and wet conditioning, the asphalt mixture would crack earlier after encountering moisture damage. The research method combining laboratory tests and numerical simulations demonstrated more comprehensively the impact of moisture damage on the fracture performance of asphalt mixture from a macro to meso perspective.

Influence of Graded Coarse Aggregate Content and Specific Surface Area on the Fracture Properties of Asphalt Mixtures Based on Discrete Element Simulations and Indoor Tests

Mechanical Evaluation of Aggregate Gradation to Characterize Load Carrying Capacity and Rutting Resistance of Asphalt Mixtures

Three-Dimensional Discrete Element Modelling Of Influence Factors Of Indirect Tensile Strength Of Asphalt Mixtures

Using Overlay Test to Evaluate Fracture Properties of Field-Aged Asphalt Concrete

Discrete Element Modeling of Aggregate Gradation Influence on the High Temperature Stability of Structural-Layer Asphalt Mixtures

STUDY ON STRESS INTENSITY FACTOR AFFECTED BY FRICTION COEFFICIENT BETWEEN SURFACE LAYER AND SUBBASE

Effects of Asphalt-Aggregate Ratios and Compaction Efforts on Horizontal Aggregate Homogeneity in Asphalt Mixtures

Predicting Fatigue Crack Growth Rate of Cement-Based and Asphalt Paving Materials Based on Indirect Tensile Cyclic Loading Tests

Influence of gradation on volume characteristics and engineering performance of asphalt mixture

Mesoscopic Mechanical Properties of Aggregate Structure in Asphalt Mixtures and Gradation Optimization

Fractal characteristics of graded aggregate in asphalt mixture

Fracture Properties and Potential of Asphalt Mixtures Containing Graphene Oxide at Low and Intermediate Temperatures

Enhancement Effect of Aggregates on the Low-Temperature Cracking Resistance of Asphalt Mixtures

Simulation of Effect of Horizontal Aggregate Distribution on Indirect Tensile Test of Asphalt Mixtures Using Discrete Element Method

Research on Influence of Aggregate Gradation on the Performance of Porous Asphalt Pavement

Viscoelastic Fracture Analysis of Asphalt Concrete Pavement with Cracks

Multi-scale finite element simulation of asphalt mixture anti-cracking performance

Multi-scale Analysis on Fracture Behaviors of Asphalt Mixture Considering Moisture Damage

The Effect of Morphological Characteristic of Coarse Aggregates Measured with Fractal Dimension on Asphalt Mixture’s High-Temperature Performance

Investigation of Fracture Failure and Water Damage Behavior of Asphalt Mixtures and Their Correlation with Asphalt-Aggregate Bonding Performance

Parameter Optimisation of a 2D Finite Element Model to Investigate the Microstructural Fracture Behaviour of Asphalt Mixtures