Abstract:Establishing an integrated treatment technology system for sewage sludge and coal washery tailing by mixed combustion can effectively overcome the disadvantages of the low calorific value and utilization efficiency, realizing the efficient resource. The single-component and coupled fuel were analyzed. Aiming at the generated inhalable particulate matter during the combustion process, using multiple characterization means and the fluidized bed experimental system, the micro-characteristics and elemental distribution of coupled fuel and combustion products were obtained, and the theory based on nucleation control was analyzed to reveal particle size distribution and particulate matter emission characteristics under multiparameter coupling conditions. The nucleation mechanism of Hg on the surface of the particulate matter under mixed combustion conditions was clarified. The results show that the weight loss process of sewage sludge in the combustion process mainly includes four stages. An obvious boundary between the volatilization and combustion processes of fixed carbon does not exist; furthermore, there is some overlap between the two processes. Volatiles and minerals interact in the mixed combustion process. The constituent elements of PM1 and PM1 ∼ 10 in the generated particulate matter are mainly easily vaporizable and refractory elements, respectively. The particle size of the particles produced presents the characteristics of bimodal distribution. There is a critical value (800 °C) for the influence of combustion temperature on the emission characteristics of particulate matter. It mainly affects the emission characteristics of coarse and fine particles through dominating the occurrence forms of tar, easily gasified and refractory elements, and the collision and aggregation process between particles. Homogeneous nucleation and heterogeneous condensation are the basic pathways for the transition of Hg from the gas phase to particle nucleation, and there are different nucleation control mechanisms. The heterogeneous condensation process includes diffusion control and surface reaction control. In addition, after the coupled fuel is demineralized by acid washing, the nucleation control mechanism changes significantly from diffusion control to chemical reaction control for the particles in the continuum region.

Theoretical Investigation on the Gas Phase Reaction Mechanism of Methanol with Sn and Pb in Sludge Incineration

Reaction Mechanisms and Products of Lead with C6H6 and C6H5OH in Incineration of Sludge: A Theoretical Exploration

Reaction mechanisms and products of lead with C <sub>6</sub> H <sub>6</sub> and C <sub>6</sub> H <sub>5</sub> OH in incineration of sludge: A theoretical exploration

Reaction mechanism in desulfurization of flue gas by low temperature plasma

Study on the Reaction Mechanism of CH2O + NO2 Transformed by PbO/SnO in Double-Base Propellants Through Theoretical Calculation and Experiment

Dynamic and static insights on the interaction mechanism between heavy metal contaminants in MSW incineration flue gas and modified carbon materials: Aggregation of PbO and CdO

Effects of sulfur on lead partitioning during sludge incineration based on experiments and thermodynamic calculations

Experimental and Thermodynamic Study of the Partition of Cr, Ni, Cu, Pb, and Mn During Co-Combustion of Pickling Sludge and Bituminous Coal

Emission Characteristics and Formation Mechanism Analysis of Exhaust during Sludge Thermal Drying Process

The Thermal Behavior and Kinetics of Co-Combustion Between Sewage Sludge and Wheat Straw

Reaction Mechanism of Simultaneous Removal of H2S and PH3 Using Modified Manganese Slag Slurry

Thermodynamic analysis on heavy metals partitioning impacted by moisture during the MSW incineration.

Co-combustion of Bituminous Coal and Pickling Sludge in a Drop-Tube Furnace: Thermodynamic Study and Experimental Data on the Distribution of Cr, Ni, Mn, As, Cu, Sb, Pb, Cd, Zn, and Sn

Study of Characteristics and Heavy Metals Migration During Co-Combustion of Coal and Sludge

[Effects of Sulfur Compounds on Pb Partitioning in a Simulated MSW Incinerator].

Investigation of Heavy Metal Partitioning Influenced by Flue Gas Moisture and Chlorine Content During Waste Incineration

Effect of NaCl on the migration of heavy metals during the non-isothermal and isothermal combustion of sludge: Static and dynamic analyses

An Experiment Study on Distribution of Heavy Metals in the Incineration of Sludge

Investigation on the mercury nucleation mechanism based on the release characteristics of inhalable particles during coupled combustion of sewage sludge-coal washery tailing

In-situ XPS study for reaction mechanism of methanol decomposition over Cu-Ni/Zn catalyst

In- situ XPS study for reaction mechanism of methanol decomposition over Cu-Ni/Zn catalyst