Abstract:Transverse joints are introduced in jointed plain concrete pavement systems to mitigate the risk of cracks that can develop due to shrinkage and temperature variations. However, the structural behaviour of jointed plain concrete pavement (JPCP) is significantly affected by the transverse joint, as it creates a discontinuity between adjacent slabs. The performance of JPCP at the transverse joints is enhanced by providing steel dowel bars in the traffic direction. The dowel bar provides reliable transfer of traffic loads from the loaded side of the joint to the unloaded side, known as load transfer efficiency (LTE) or joint efficiency (JE). Furthermore, dowel bars contribute to the slab's alignment in the JPCP. Joints are the critical component of concrete pavements that can lead to various distresses, necessitating rehabilitation. The Swedish Transport Administration (Trafikverket) is concerned with the repair of concrete pavement. Precast concrete slabs are efficient for repairing concrete pavement, but their performance relies on well-functioning dowel bars. In this study, a three-dimensional finite element model (3D-FEM) was developed using the ABAQUS software to evaluate the structural response of JPCP and analyse the flexural stress concentration in the concrete slab by considering the dowel bar at three different locations (i.e., at the concrete slabs' top, bottom, and mid-height). Furthermore, the structural response of JPCP was also investigated for several important parameters, such as the joint opening between adjacent slabs, mispositioning of dowel bars (horizontal, vertical, and longitudinal translations), size (diameter) of the dowel bar, and bond between the slab and the dowel bar. The study found that the maximum LTE occurred when the dowel bar was positioned at the mid-depth of the concrete slab. An increase in the dowel bar diameter yielded a 3% increase in LTE. Conversely, the increase in the joint opening between slabs led to a 2.1% decrease in LTE. Additionally, the mispositioning of dowel bars in the horizontal and longitudinal directions showed a 2.1% difference in the LTE. However, a 0.5% reduction in the LTE was observed for a vertical translation. Moreover, an approximately 0.5% increase in LTE was observed when there was improved bonding between the concrete slab and dowel bar. These findings can be valuable in designing and evaluating dowel-jointed plain concrete pavements.

Study on Dowel Bar Length and Spacing Based on Theoretical Computation

Analytical Calculation Method of Seismic Resistant Response for Posttensioned Precast Bridge Piers

A Parametric Study Investigating the Dowel Bar Load Transfer Efficiency in Jointed Plain Concrete Pavement Using a Finite Element Model

Evaluation of the impact of selected material and technological parameters of dowel bars on the behaviour of Portland Cement Concrete pavement

Experimental study on mechanical properties of dowel bar embedded in concrete under fatigue loads

Load-Carrying Capacity and Practical Calculation Method for Hollow Cylinder Joints Connected with H-Shaped Beams

Numerical investigation on the behaviour of the high-strength ring strengthened dowel connection under vertical load

Performance Analysis and Optimization of Dowels in Jointed Concrete Floors

Finite Element Investigation of the Deterioration of Doweled Rigid Pavements

Research on the Behavior of Rigid Pavement of Basalt Fiber Reinforced Dowel Bar under the Condition of Variable Temperature

Mathematical model for dowel bearing capacity considering the effect of concrete damage

Effect of Dowel Joints on Dynamic Behavior of Train–discrete Floating Slab Track System

Experimental investigation of dowel action in reinforcing bars using refined measurements

Three-Dimensional Bond Model Considering the Coupled Damage Effect for Dowel Action

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Crack Width Calculation Methods Of Reinforced Concrete Beidges And Application

Numerical Simulation Analysis of the Bending Performance of T-Beams Strengthened with Ultra-High-Performance Concrete Based on the CDP Model

Experimental and numerical study on structural behavior of folded dowel shear connection

Steel stresses and shear forces in reinforcing bars due to dowel action

Effects of dowels on the mechanical properties of wooden composite beams in ancient timber structures

An analysis of the mechanical properties of precast steel fiber reinforced concrete pavement joints