Abstract:Fluorinated electrolytes based on fluoroethylene carbonate (FEC) have been considered as promising alternative electrolytes for high-voltage and high-energy capacity lithium-ion batteries (LIBs). However, the compatibility of the fluorinated electrolytes with graphite negative electrodes is unclear. In this paper, we have systematically investigated, for the first time, the stability of fluorinated electrolytes with graphite negative electrodes, and the result shows that unlike the ethylene carbonate (EC)-based electrolyte, the FEC-based electrolyte (EC was totally replaced by FEC) is incapable of forming a protective and effective solid electrolyte interphase (SEI) that protects the electrolyte from runaway reduction on the graphite surface. The reason is that the lowest unoccupied molecular orbital energy levels are also lowered by the introduction of fluorine into the solvent, and the FEC solvent has poorer resistance against reduction, leading to instability on the graphite negative electrode. To tackle this problem, two lithium salts of lithium bis(oxalato)borate and lithium difluoro(oxalato)borate (LiDFOB) have been investigated as negative-electrode film-forming additives. Incorporation of only 0.5 wt % LiDFOB to a FEC-based electrolyte [1.0 M LiPF6 in 3:7 (FEC−ethyl methyl carbonate)] results in excellent cycling performance of the graphite negative electrode. This improved property originates from the generation of a thinner and better quality SEI film with little LiF by the sacrificial reduction of the LiDFOB additive on the graphite negative electrode surface. On the other hand, this additive can stabilize the electrolyte by scavenging HF. Meanwhile, the incorporated LiDFOB additive has positive influence on the interphase layer on the positive electrode surface and significantly decreases the amount of HF formation, finally leading to improved cycling stability and rate capability of LiNi0.5Mn1.5O4 electrodes at a high cutoff voltage of 5 V. The data demonstrate that the LiDFOB additive not only exhibits a superior compatibility with graphite but also improves the electrochemical properties of high-voltage spinel LiNi0.5Mn1.5O4 positive electrodes considerably, confirming its potential as a prospective, multifunctional additive for 5 V fluorinated electrolytes in high-energy capacity lithium-ion batteries (LIBs).

Li[(FSO 2 )( N ‐C 4 F 9 SO 2 )N]: A Difunctional Salt for Ethylene‐Carbonate‐ and Additive‐Free Electrolyte for Li‐Ion Cells

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Concentrated LiFSI–Ethylene Carbonate Electrolytes and Their Compatibility with High-Capacity and High-Voltage Electrodes

Enabling the use of lithium bis(trifluoromethanesulfonyl)imide as electrolyte salt for Li‐ion batteries based on silicon anodes and Li(Ni0.4Co0.4Mn0.2)O2 cathodes by salt additives

Locally Fluorinated Electrolyte Medium Layer for High-Performance Anode-Free Li-Metal Batteries.

A Compatible Carbonate Electrolyte with Lithium Anode for High Performance Lithium Sulfur Battery

Ethylene Carbonate‐Free Propylene Carbonate‐Based Electrolytes with Excellent Electrochemical Compatibility for Li‐Ion Batteries through Engineering Electrolyte Solvation Structure

Fluorinated Electrolytes for Li-Ion Batteries: The Lithium Difluoro(oxalato)borate Additive for Stabilizing the Solid Electrolyte Interphase

High-Voltage Graphite//LiNi0.5Mn1.5O4 Full Cell with Bis(fluorosulfonyl)Imide and bis(trifluoromethyl)Sulfonylimide Ionic Liquid Electrolytes

An Inorganic‐Rich Solid Electrolyte Interphase for Advanced Lithium‐Metal Batteries in Carbonate Electrolytes

Xia, Lan and Lee, Saixi and Jiang, Yabei and Xia, Yonggao and Chen, George Z. and Liu, Zhaoping (2017) Fluorinated electrolytes for li-ion batteries: the lithium difluoro(oxalato)borate additive for stabilizing the solid

A Nonflammable Diethyl Ethylphosphonate-Based Electrolyte Improved by Synergistic Effect of Lithium Difluoro(Oxalato)Borate and Fluoroethylene Carbonate

Difluoroethylene Carbonate as an Electrolyte Additive for Engineering the Electrolyte-Electrode Interphase of Lithium Metal Batteries

Blended Salt Electrolyte Design for Enhanced NMC811||Graphite Cell Performance

Bifunctional Fluorocarbon Electrode Additive Lowers the Salt Dependence of Aqueous Electrolytes

FSI-inspired solvent and “full fluorosulfonyl” electrolyte for 4 V class lithium-metal batteries

Synthesis and electrochemical performance of an imidazolium based Li salt as electrolyte with Li fluorinated sulfonylimides as additives for Li-Ion batteries

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Pairing non‐solvating cosolvent with weakly solvating solvents for facile desolvation to enable EC‐free and high‐rate electrolyte for lithium ion batteries

A Localized High-Concentration Electrolyte with Optimized Solvents and Lithium Difluoro(oxalate)borate Additive for Stable Lithium Metal Batteries

LiF-Rich Electrode-Electrolyte Interfaces Enabled by Bifunctional Electrolyte Additive to Achieve High-Performance Li/LiNi 0.8 Co 0.1 Mn 0.1 O 2 Batteries