Abstract:Rencently, covalent functionalization carbon nanotubes have been received special attention because of the expansive application prospect in the areas of nanoscience and nanotechnology. Moreover, covalent functionalization of carbon nanotubes can readily deal with fundamental issues of purification, solubilization, and processing. In particular, polyaniline, due to its high electronic conductivity, good environmental stability, easy preparation and reversible acid-base doping-dedoping chemistry, has been one of the most studied conducting polymers. Recently, CNTs-PANI composites were investigated widely, such as supercapacitor, optoelectronic devices, sensing and catalysis as well. In this work, we perform in situ polymerization method at low temperatures obtaining uniform structures PANI grafted on CNTs (which has been covalently functionalization with –NH2 groups on its surface) composites. Concerning CNTs-NH-PANI composites, PANI could be covalently grafted onto CNTs through –NH2 groups. Due to the fact that CNTs-NH-PANI composites have abundant -NH2 groups on their surface, serving as anchor centers for polymerization of aniline monomer. Introduction of–NH2 groups can not only increase the dispersion of carbon nanotubes itself, but also can be as growth sites to form PANI uniform grafted to the “core-shell” structure of carbon nanotubes in the growth process of PANI. More importantly, PANI uniformly grafted on CNTs is prone to disperse the bundle of CNTs into separated lines and improve water dispersibility of obtained CNTs-NH-PANI composites. Potential application of the composite material as high performance supercapacitor has been explored. Composite material samples were characterized by transmission electron microscopy (TEM), X-ray diffraction(XRD) and electrochemical methods and so on. TEM results showed that the hierarchical CNTs-PANI composites with uniform morphology have been successfully prepared due to hydrophilic groups -OH and –NH2 are successfully covalently functionalization on the surface of CNTs. Moreover, the electrochemical measurement show that CNTs-NH-PANI composites have high specific capacitance as supercapacitor material. At the current density of 0.1A/g, the specific capacity can reach 251.2F/g. For PANI, the capacitance contribution is higher in covalently grafted CNTs-g-PANI composites than PANI-c-CNTs. At the Charge-Discharge test, at the current density of 1A/g, the composite material capacity retention stability rate at 64% after 5000 charge discharge test, higher than that of PANI-c-CNTs 48% significantly.

Study on Acidified Carbon Nanotubes Modified Polyacrylonitrile Hollow Fiber Membrane

Improving the Performance of Polyamide Reverse Osmosis Membrane by Incorporation of Modified Multi-Walled Carbon Nanotubes

Behaviors and mechanisms of copper adsorption on hydrolyzed polyacrylonitrile fibers.

Effect of polyacrylonitrile hollow fiber modified membrane on heavy metal ion adsorption

Eco-Friendly Carbon Nanotubes Reinforced with Sodium Alginate/Polyacrylic Acid for Enhanced Adsorption of Copper Ions: Kinetics, Isotherm, and Mechanism Adsorption Studies

Study on adsorption performance of polyacrylonitrile-based activated carbon fiber for trace of hexavalent chromium

Study On Graphene Oxide-Modified Polyacrylonitrile Hollow Fiber Membrane

Preparation of high-flux thin film nanocomposite reverse osmosis membranes by incorporating functionalized multi-walled carbon nanotubes

Research on the modification of PAN hollow fiber membrane with high heavy metal ions adsorption

Carbon nanotubes regulated polyamide membrane by intercalation to improve the organic solvent nanofiltration performance

Phytic acid modified polyacrylonitrile nanofiber membranes: Fabrication, characterization, and optimization for Pb2+ adsorption

Tip and inner walls modification of single-walled carbon nanotubes (3.5 nm diameter) and preparation of polyamide/modified CNT nanocomposite reverse osmosis membrane

Preparation of the Carbonized Zif−8@PAN Nanofiber Membrane for Cadmium Ion Adsorption

CNTs Intercalated LDH Composite Membrane for Water Purification with High Permeance

Preparation and Capacitance of Copper-Doped Activated Carbon from Polyacrylonitrile (pan) Precursor

Super-adsorptive and photo-regenerable carbon nanotube based membrane for highly efficient water purification

Mineralized Polyacrylonitrile-Based Ultrafiltration Membranes with Improved Water Flux and Rejection Towards Dye

Electroless Deposition for Robust and Uniform Copper Nanoparticles on Electrospun Polyacrylonitrile (PAN) Microfiltration Membranes

Construction of Highly Hydrophilic PAN-co-IA/CNTs@TA Composite Membrane with Large Flux and High Retention for Purification of Dye Wastewater

Aminated Polyacrylonitrile Fibers for Lead and Copper Removal

Preparation and Supercapacitive Performance of Polyaniline Covalently Grafted Carbon Nanotubes Composite Material