Abstract:A simple spray approach to fabricate superhydrophobic coatings on tile and glass substrates is presented. Commercial available polyphenylene sulfide (PPS) and hydrophobic silica (H-SiO(2)) powder were suspended in ethanol and the mixed suspensions were spray on substrates. After dried at different temperatures, surface coatings with different hydrophobicity were obtained. By observing the surface morphologies with scanning electron microscope (SEM) and atomic force microscope (AFM), and measuring water contact angles with a contact angle system, factors affecting the morphology, roughness and contact angle of the surface coatings, such as thermal treatment temperature and the weight ratio of H-SiO(2) to PPS, were investigated in detail. With the increase of the thermal treatment temperature, both the surface roughness and the contact angle increased when the temperature was lower than 280 degrees C. As the weight ratio of H-SiO(2) to PPS rose from 1: 10 to 1:1, more H-SiO(2) powders accumulated on the surface, leading to a significant increase of hydrophobicity. The surface coating obtained at 280 degrees C with the weight ratio of H-SiO(2) to PPS 1:1 showed a water contact angle higher than 150 degrees and a sliding angle lower than 4, exhibiting fascinating superhydrophobic properties. The surface coating could remain superhydrophobicity upon a further increase in thermal treatment temperature or the amount of H-SiO(2) powder. Moreover, the surface coatings showed high contact angles, larger than 150, for all the solutions with pH ranging from 1 to 14. The abrasion resistant property of the as-prepared superhydrophobic surface coating was tested using a homemade setup. Being scraped by freely-falling sands, the superhydrophobic coating could keep its high hydrophobicity, while a commercial hydrophobic coating transformed from hydrophobicity to hydrophilicity. This result implied our superhydrophobic surface coating was very stable. Moreover, chalk powders on the superhydrophobic surface coatings could easily be washed off with water, indicating good self-cleaning properties. The presented approach is convenient and can be potentially applied in fabrication of superhydrophobic surfaces in large scale.

Synthesis and Characterization of Polyacrylate Composite and Its Application in Superhydrophobic Coating Based on Silicone-Modified Al2O3

Preparation and characterization of polyacrylate composite and its application in superhydrophobic coating based on silicone-modified ZnO

Facile Fabrication of Superhydrophobic Nanocomposite Coatings Based on Water‐Based Emulsion Latex

Preparation of Silicone Modified Polyurethane/Nano-SiO<sub>2</sub> Composite Superhydrophobic Coating

Preparation and Characterization of Modified ZrO2/SiO2/Silicone-Modified Acrylic Emulsion Superhydrophobic Coating

Fabrication of silicone modified polyurethane matrix superhydrophobic coating with hydroxy-terminated polydimethylsiloxane modified SiO2 nanoparticles

Preparation of Fluoroalkyl-Acrylate-Modified Polysiloxane Nanocomposite and Its Surface Properties as a Superhydrophobic Coating Material

Facile Fabrication of Superhydrophobic Polymethyltriethoxysilane- Polymethylhydrosiloxane Coatings

Design and Preparation of Hydrophobic Silica Particles and Study on Modified Epoxy Resin

Robust superhydrophobic silicone/epoxy functional coating with excellent chemical stability and self-cleaning ability

Fast Fabrication of Silicone-Modified Polyurethane/sio2 Composite Superhydrophobic Coating with Excellent Anti-Icing and Self-Cleaning Behaviour

Building a Mechanically Stable Polydimethylsiloxane/silica Superhydrophobic Coating on Poly(chloro-P-xylylene) Film by Introducing a Polydimethylsiloxane Adhesive Layer

Fabrication of Superhydrophobic Coating Based on Waterborne Silicone-Modified Polyurethane Dispersion and Silica Nanoparticles

PREPARATION AND PROPERTIES OF SUPERHYDROPHOBIC POLYPHENYLENE SULFIDE COMPOSITE COATINGS

Synthesis and self-cleaning properties of superamphiphobic coatings based on burr-like copolymer particles

Facile Fabrication of Superhydrophobic Coating Based on Polysiloxane Emulsion

Study on the Preparation and Properties of Super Hydrophobic Coatings

Composition Design and Performance Assessment of Superhydrophobic Coating Based on Fluorine-Silicone Resin

Superhydrophobic Coatings Prepared by the in Situ Growth of Silicone Nanofilaments on Alkali-Activated Geopolymers Surface

A Superhydrophobic Polyacrylate Film with Good Durability Fabricated Via Spray Coating

Design and preparation of multiple silica particles and study on superhydrophobic modified epoxy resin