Abstract:Modern industrialization is accompanied with the extensive usage of fossil fuels for energy demands and consequently, an excessive emission of CO2 into the atmosphere. To combat the injurious greenhouse effects, the CO2 electroreduction (CER) to feedstocks and fuels becomes an appealing approach to reducing CO2 emission and simultaneously producing useful products. It is generally recognized that the solid-catalyst/liquid-electrolyte/gaseous-CO2 triple-phase boundary is the key microstructure feature of CER, where CO2 molecules react with protons (H+) and e− and are reduced. Besides the intrinsic activity of catalyst itself and the accessibility of active sites, CER performance also strongly depends on the transport of H+ and CO2 molecules through electrolyte to catalyst surface. Apparently, the availability of H+ in aqueous solution can be readily achieved via H2O ionization, while the low solubility of CO2 limits the supply of CO2 to the catalyst surface. Moreover, previous study has demonstrated that complete depletion of CO2 on the catalyst surface can even occur when high overpotential is applied.1 In this regard, rationally designing the structure of catalyst to increase the concentration of CO2 at the triple-phase boundary is immensely significant for CER since this could overcome the limited diffusion of CO2 in aqueous medium. Recently, surface hydrophobicity engineering has been proved to be a wise tactic to increase the local CO2 concentration by trapping CO2 near the catalyst surface, thus improving CO2 electrolysis. For example, modification of the hydrophobic organics on catalyst surface could create triple-phase boundary and increase CO2 concentration on catalyst surface, these improved CER performance and simultaneously inhibited HER.2 Unfortunately, the insulative organics coated on the catalyst surface will sacrifice its activity, while some small pieces of organics may desorb from the surface or in the case of flow cell, these pieces can be flushed away by the fluid. Since most catalysts are in situ grown on carbon support with the advantages of rapid electron transfer and seamless contact,3, 4 it is possible to tailor the microenvironment around the catalyst through chemical modification of carbon support. For example, platinum-based catalysts supported on hydrophobic carbon with a desirable microenvironment display a state-of-the-art catalytic activity for oxygen reduction reaction.5 However, few studies have been conducted to investigate how the carbon support can be modified to create a favourable triple-phase boundary for CER. In this study, we have in situ grown Bi2O3 nanosheets (NSs) on two types of carbon materials, hydrophobic carbon nanofiber (Bi2O3@C/HB) and hydrophilic carbon nanofiber (Bi2O3@C/HL), respectively, and used them as the cathode catalysts for CER. Compared to Bi2O3@C/HL, the as-obtained Bi2O3@C/HB exhibits significantly boosted CER performances for formate formation with the high FEformate of ˃ 93% over an extremely wide potential window of 1000 mV, high formate partial current density (jformate ) of 102.1 mA cm−2 and high formate formation rate of 1905 μmol h−1 cm−2. Molecular dynamics (MD) simulations together with electrochemical measurements reveal that the hydrophobic carbon support can create a hydrophobic microenvironment by avoiding the formation of hydrogen bond. This increases the local CO2 concentration and pH, both contributing to the enhancement of the overall CER. We believe that the findings from this work can provide significant guidelines for designing highly active CER catalysts and showcase a promising approach to improving other types of electrolysis involving gas phase. Raciti, D.; Mao, M.; Park, J. H.; Wang, C., Mass transfer effects in CO2 reduction on Cu nanowire electrocatalysts. Catal. Sci. Technol. 2018, 8, 2364-2369. Wang, J.; Cheng, T.; Fenwick, A. Q.; Baroud, T. N.; Rosas-Hernández, A.; Ko, J. H.; Gan, Q.; Goddard Iii, W. A.; Grubbs, R. H., Selective CO2 Electrochemical Reduction Enabled by a Tricomponent Copolymer Modifier on a Copper Surface. J. Am. Chem. Soc. 2021, 143, 2857-2865. Liu, S.; Lu, X. F.; Xiao, J.; Wang, X.; Lou, X. W., Bi2O3 nanosheets grown on multi‐channel carbon matrix to catalyze efficient CO2 electroreduction to HCOOH. Angew. Chem., Int. Ed. 2019, 58, 13828-13833. Li, F.; Chen, L.; Knowles, G. P.; MacFarlane, D. R.; Zhang, J., Hierarchical mesoporous SnO2 nanosheets on carbon cloth: a robust and flexible electrocatalyst for CO2 reduction with high efficiency and selectivity. Angew. Chem., Int. Ed. 2017, 56, 505-509. Zhao, Z.; Hossain, M. D.; Xu, C.; Lu, Z.; Liu, Y.-S.; Hsieh, S.-H.; Lee, I.; Gao, W.; Yang, J.; Merinov, B. V., Tailoring a Three-Phase Microenvironment for High-Performance Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cells. Matter 2020, 3, 1774-1790.

Performance Of Co2 Electrochemical Reduction With Surface Modified Self-Growing Sno2 On Carbon Cloth Electrode Prepared By Hydrothermal Method

Sn-Doped Bi2O3 Nanosheets for Highly Efficient Electrochemical CO2 Reduction Toward Formate Production.

Promotional Effect of Surface Hydroxyls on Electrochemical Reduction of Co2 over Snox/Sn Electrode

Surface Modification of SnO2 Nanosheets Via Ultrathin N-doped Carbon Layers for Improving CO2 Electrocatalytic Reduction

Triple-phase electrocatalysis for the enhanced CO2 reduction to HCOOH on a hydrophobic surface

Electrochemical reduction of SnO2 to Sn from the Bottom: In-Situ formation of SnO2/Sn heterostructure for highly efficient electrochemical reduction of carbon dioxide to formate

Densely packed ultrafine SnO2 nanoparticles grown on carbon cloth for selective CO2 reduction to formate

Tailoring a Three-Phase Microenvironment for High-Performance CO2 Electroreduction

Low Overpotential Electroreduction of CO2 on porous SnO2/ZnO Catalysts

Performance of carbon dioxide electrochemical reduction with carbon felt loaded Sn gas diffusion electrode

Role of the Oxide Layer on Sn Electrode in Electrochemical Reduction of Co2 to Formate

CO<sub>2</sub> Reduction on Metal-Doped SnO<sub>2</sub>(110) Surface Catalysts: Manipulating the Product by Changing the Ratio of Sn:O

Selective CO2 Reduction to Formate on Heterostructured Sn/SnO2 Nanoparticles Promoted by Carbon Layer Networks

Controllably Engineering Mesoporous Surface and Dimensionality of SnO<sub>2</sub>toward High-Performance CO<sub>2</sub>Electroreduction

Electrodepositing Dense Sn/SnBi Alloy on Carbon Cloth for Electrocatalytic CO2 Reduction

Sn-based Film Electrodeposited on Ag Foil for Selective Electrochemical CO2 Reduction to CO

Hierarchical Bimetallic Electrocatalyst with Amorphous SnO Layer for Highly Efficient Electroreduction of CO 2

A computational study of electrochemical CO2 reduction to formic acid on metal-doped SnO2

Tailoring the Electrochemical Protonation Behavior of CO2 by Tuning Surface Noncovalent Interactions

Tunable and Efficient Tin Modified Nitrogen-Doped Carbon Nanofibers for CO2 Electroreduction

Conversion of Organically Directed Selenidostannate into Porous SnO 2 Exhibiting Effective Electrochemical Reduction of CO 2 to C 1 Products