Abstract:In this study, we developed a dynamic self-balanced electrochemical model to explore the intricate interplay between coupled heat-moisture transmission and the corrosion process of steel reinforcement in concrete structures. The model accounts for the diffusion, convection, and adsorption mechanisms of chloride ions in both the cement paste and interfacial transition zone (ITZ) phases. Additionally, it incorporates the balance between gaseous and dissolved oxygen, along with oxygen consumption during cathodic reactions. This framework allows for the dynamic self-balancing of macrocell and microcell, thus offering a comprehensive understanding of the non-uniform corrosion process under various environmental factors including temperature, humidity, chloride ions, and oxygen. To validate the model, we employed comprehensive monitoring approaches, coupled with artificial climate-accelerated corrosion experiments. These were designed to record variables such as temperature, humidity, oxygen concentration, and corrosion current density under time-varying environmental conditions. Our results indicate that while temperature within the concrete remains relatively uniform, humidity exhibits a non-uniform distribution. This non-uniformity in humidity is particularly noticeable at concrete cover surface, leading to convection and accumulation effects of chloride ions. Moreover, we observe a strong correlation between oxygen concentration and relative humidity. Corrosion current density for steel rebar is found to be higher at edge regions compared to central regions, owing to varying distances from the external soaking solution. The insights gained from this research offer valuable theoretical guidance for the design, construction, and maintenance of reinforced concrete structures, particularly those exposed to marine environments.

Corrosion Monitoring Of Reinforcing Steel In Concrete By Potentialdynamic Scan Method

Study on the Real-Time Dynamic Monitoring of Corrosion Rate of Reinforcement in Carbonation Environment

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

THE STATE OF THE ART OF CONCRETE STRUCTURE DURABILITY MONITORING AND RESTORATION

Evaluation of corrosion morphology on mechanical properties of reinforcing steel bars using numerical simulation and simplified analytical model

Applicability Study on Accelerated Corrosion Methods of Steel Bars in Concrete Structure

Dynamic Self-Balanced Electrochemical Model for Non-Uniform Corrosion of Steel Reinforcement in Concrete under Combined Effects of Heat-Moisture-chlorine-oxygen

Mechanical Performance of Corroded Steel Bars in Concrete

Corrosion monitoring of reinforcing steel in cement mortar by EIS and ENA

Study of Wiring Method on Accelerated Corrosion of Steel Bars in Concrete

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Analysis on steel corrosion at the cracking of concrete

Corrosion of Steel Embedded in Mortar and Concrete under Different Electrolytic Accelerated Corrosion Methods

Electrical Based Sensors and Remote Monitoring System for Assessing the Corrosion Related Activity in Concrete at Hangzhou Bay Bridge

Review on Electrochemical Detection Techniques for Corrosion of Reinforcing Steel in Concrete

SIMULATED RESEARCH ON CORROSION OF REINFORCEMENT IN CONCRETE UNDER CHLORIDE ENVIRONMENT

On the Penetration of Corrosion Products from Reinforcing Steel into Concrete Due to Chloride-Induced Corrosion

A Monitoring Method Based On Fbg For Concrete Corrosion Cracking

A Self-Balanced Electrochemical Model for Corrosion of Reinforcing Steel Bar in Considering the Micro-Environments in Concrete

Research on Reinforcement Corrosion in Concrete by Using Electrochemical Frequency Modulation Technology